Jump to content
SAU Community

Dyno'd My Single Turbo R32 Gtr *video*

flowgoode
 Share

Recommended Posts

flowgoode Apprentice

flowgoode

Posted
  • Author
Posted

Less chat more boost!!

hahaha, yeah. I will do that after I upgrade headbolts.

Yeah it will make a difference, it's called more lag with longer duration cams :)

Is that actually always true? Wouldn't longer duration exhaust cam let out more exhaust flow to spool the turbo faster? Or would having more duration intake and more duration exhaust just equal out and have me where I currently sit as far as lag is concerned?

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Yes, always true.

Your essentially shifting the motor's efficiency to the right.

Whoever recommended you longer duration cams for response should go read a few text books and educate themselves (saying that very nicely).

You want some more response, I suggest going to a twin scroll setup, ie divided housing, proper twin scroll manifold, twin gates.

flowgoode Apprentice

flowgoode

Posted
  • Author
Posted

Yes, always true.

Your essentially shifting the motor's efficiency to the right.

Whoever recommended you longer duration cams for response should go read a few text books and educate themselves (saying that very nicely).

You want some more response, I suggest going to a twin scroll setup, ie divided housing, proper twin scroll manifold, twin gates.

No one recommended me longer duration for response. I bought the cams before going single turbo. So I have them to put in still. Looks like I'll be looking for a twin scroll setup in the future...or stroker kit lol

XGTRX Veteran

XGTRX

Posted
Posted

No one recommended me longer duration for response. I bought the cams before going single turbo. So I have them to put in still. Looks like I'll be looking for a twin scroll setup in the future...or stroker kit lol

Put the cams in and boost it. Get that face stretch going.

HarrisRacing Proficient

HarrisRacing

Posted
Posted

I saw your dyno.

I'm on Tomei Poncam A's with the 260 duration intake and 252 duration exhaust on a stroker motor with divided exhaust housing on BW 8374 EFR IWG .92 housing and I am seeing full boost in 4th gear around 3600 rpms, but full boost in 3rd right at 4k. I'm spinning to 8k rpms and 17 psi is 464 whp and 371 ft-lbs toqrue.If you look at Tomei's website about their stroker kit, my horsepower numbers follow their dyno almost exactly with a 20% addition in power (converting to flywheel from wheel HP). If you notice, there appears to be about a 400 rpm shift to the left from going to a stroker with a bit more top end due to increased displacement.

I'd say your numbers are on target to be honest. We both need to apply more boost and/or move to E85 (which will definitely be my next step - give me a couple of months). I'm still trying for 500 whp on pump gas which should be possible up around 19-20 psi and I would bet it would hit 400 wtq there as well.

Also it should be noted that if I were to go for total streetable HP ON 93 PUMPGAS on a RB26 with stock cams, I would go smaller than 62mm turbo chargers - I would pick something in the high 50mm...like BW 7670 or in your case 5862. These will all have a better powerband and will make the car more usable on the street if less than 20 psi boost. The 7670 would be insanely fast and responsive. I was going to go there, but when the stroker decision was made, i scrapped it for 8374. Again, you'll be limited to 8k or less rpms and likely 20 psi or less, but you'll have better powerband for sure.

I have attached my graph, I'd like to compare the two if you have a printout of yours (or could put it in the attached excel spreadsheet).

 

dyno converted.JPG

dyno converted.xlsx

Tomei stroker information.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...