Jump to content
SAU Community

Recommended Posts

Hi guys, long time lurker, finally decided to make an account coz I need a bit of help.

I was involved in an accident yesterday around the corner from my home. I stopped mid way across the oncoming lane in a right turn T - intersection to let a hesitant elderly pedestrian through and another driver somehow didn't see me from 200m away to brake in time and slammed into my front left. Damage looks pretty bad but I'm hoping it can be repaired. I've only got third party insurance and at this point of time, the police reckon its my fault even though I explained its a 50km/h zone and I had to stop to wave the hesitant pedestrian through.

I'm after someone reliable and honest to work on my car to fix it up. Hopefully someone who won't overcharge on parts and labour since money is tight. I live in the northern suburbs so something close would be good however honesty on pricing is main thing.

Can SAU please recommend someone?

I've attached picture of the damage in case someone on here can give me a rough estimate on pricing, etc.

post-143625-0-08024700-1467239677_thumb.jpg

post-143625-0-52415600-1467239796_thumb.jpg

post-143625-0-35472400-1467239971_thumb.jpg

post-143625-0-22232500-1467240047_thumb.jpg

post-143625-0-63079400-1467240198_thumb.jpg

post-143625-0-52670600-1467240333_thumb.jpg

post-143625-0-84694000-1467240439_thumb.jpg

post-143625-0-14628700-1467240534_thumb.jpg

Take it to a random panel shop and get a free quote / list of parts required. It'll cost you some time and a trailer, assuming they do walk in quotes (check first)

Assuming there is no damage to the actual chassis rails:
Straightening the mangled body is a big task and hard to get right, new side fender, headlights, indicators, front bar, lots of plastic bits, bonnet, many hours of labour.

R34 GT, not worth fixing... If you can't afford Full Comp Insurance, then you definately can't afford the repair to make this car right again. Cheapest option is probably going to be to buy a new one and sell off bits from this one as parts.... But at the end of the day, its a GT, so the engine and gearbox aren't worth much...

I think you're going to find you're up 5h!t creek without a paddle (insurance).

Since it's not an insurance job, you won't have a problem finding a workshop to do it for you, but you'll be paying a lot for it.

Really wish I had full comp after reading your reply Odium. I was quoted $3500 as a 22 yo P-Plater so I went with 3rd party :unhappy: .

Assuming you have experience with repairs etc, what is a ballpark figure I could look to pay using 2nd hand parts? Any idea what/who to I could sell the car for parts if I decide to go that way?

Whats a reasonable amount to spend for repairs vs just selling it for parts?

Bloody headache, might just go with full comp, no matter price, next time just so I don't have to worry about chasing a panel shop next time :)

Really wish I had full comp after reading your reply Odium. I was quoted $3500 as a 22 yo P-Plater so I went with 3rd party :unhappy: .

thats a ridiculous amount of money. but with how many skylines are getting stolen it's probably not unreasonable. I certainly dont think its worth it, unless you expect it to be stolen or smashed?

1) get insurance quotes before you purchase a car

2) dont get a cop/thief-bait car until after P's.

Unfortunately thats the way of the world now.

I know your pain mate. My car was written off 4 weeks ago also.

All I know from experience is that your stuffed once the airbags deploy. Min $3000 fix before panel work is quoted. Insurance will write off on spot almost.

Gal Smash repairs in Tullamarine  are good. I went to quote my wreck to be fixed but it worked out more than the cars worth. The guy there was really nice and gave an honest advice.

  • 3 weeks later...

Thanks lavin, I've taken apart most of the front and am ordering a nose cut. Will call Harveys for a quote on panel beating and re assemble. How are their prices? Anyone specific to talk to there?

That thing is f**ked.

Anything is fixable, but there ain't no way that's going to be worth it.  It'd be cheaper to go buy a new car.

Why? I can get a nose cut for $750 which has all the parts I need. The rad support is spot welded on and the guard is welded onto the chassis as well. If I can get the panels beaten into shape for $2000, why would it make sense to "just buy a new car"?

IMG_20160715_091549.jpg

If you can get the panels beaten into shape for $2,000.....there's problem A.  A front cut for $750?  From where?  A decent set of headlights alone will set you back almost that much.

If the strut tower isn't moved, I'll be surprised.  If the firewall isn't out of shape, I'll be surprised.  If the front chassis rails aren't bent, I'll be surprised.

I hope for your sake I end up being very surprised, but if I were a betting man, I'd say you won't get away with fixing it for under $10k.

On 22/07/2016 at 9:07 PM, ssin said:

$750 for a Nose Cut.....I agree with Aaron. Your looking around $1500 for a Series 2. I paid under $200 for a front Series 2 Rad Support Section. But that wheel arch looks dodgy. . I got quoted $1500 to fix and refit the front of mine if I supplied the stock.

 

RadS.JPG

  • 1 month later...

I'll be selling this after I remove the parts I require off it to fix my car. It's a 1997 SII 40th Anniversary 12/1997 build date 120,000kms on clock, unregistered, Auto gearbox.

Selling with engine, gearbox, bonnet,entire car won't be cut as I have a rad support panel. Also got spare front bar, front bar lights, fan and other stuff.

PM me if you like/ Won't be available until after they fix my car, maybe 1-2 months

IMG_0731.JPG

IMG_0735.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...