Jump to content
SAU Community

Recommended Posts

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

On 17/12/2016 at 1:37 PM, R33gtst2016 said:

Or is it not a gasket just sealant ?

do not ever use sealant, you'll end up in a sad financial mess if you do.

OEM seal or OEM seal those are your options.

Note the S14 and S15 seal fits too on your R33 R34

So I've f**ked up along the way somewhere I changed it over I thought all went well, but won't start, cranks over but doesn't start tonight after work I gotta take it back out and double check my wiring were right positive to positive n negative to negative, there's a dash light on but I dno what it is

That tells you when your Cat Coverter is blocked (there is a temp probe in the Cat that sets off the light at a certain temp)

Could it be a Cat problem? If that is coming up when you are trying to crank I doubt it. I'd only expect it to come up after the car is driven for a bit

Are you hearing the pump run? If no it may be a wiring issue. I remember remarking at how brittle/fragile some of the fuel pump wiring was, maybe something has broken with those. If you are hearing the pump run I would pull the whole assembly back out and make sure everything is installed as it should be.

I would confirm you are hearing the pump first. Then, if you are, pull the fuel line going to the fuel rail off and try to crank it and see how strong of a stream you have (you may want to just test for pressure).

If those tests "fail" then I would pull the pump out and inspect everything.

Not sure if its the same on R32's but on my R33 if i turn the key about halfway between on and start and hold it there the fuel pump runs. Did so with Power FC anyway and the Link does it to however cuts the pump after a few seconds

  • 2 weeks later...

What would happened when I try to start the car if I didn't put the hoses on correctly? I've checked I can defiantly hear the pump, but still won't start just cranks, thought that I've put everything back the way it was originally but don't understand why won't start. Any ideas

Maybe you have the inlet and outlet hoses crossed? On the 32s that space is tight and they could easily get crossed. Easiest way to check is to pull fuel line going to rail and reroute it into a bucket. If you can crank it and fuel comes out, you know they are plumbed correctly.

Also, what condition is your fuel filter in? A clogged filter could give you grief as well.

If you took the hoses off at the pump and aren't getting any flow, the issue is in the tank. If the pump was working correctly you'd have fuel everywhere.

To answer your last question, you want to focus on the hose between the filter and the rail, removing it from where it connects to the rail.

But start at the tank, it sounds like your pump isn't pumping.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
×
×
  • Create New...