Jump to content
SAU Community

Recommended Posts

I'm skipping that and going straight to motor/box out, then I'll look at the head and you can come over for some beers and laugh...

I must say, it has survived many many many many track days and numerous anti-lag 2-step launches too (on private property ahem..)

On ‎12‎/‎12‎/‎2016 at 5:35 PM, Dose Pipe Sutututu said:

fuuark that, big cams are gay on a stock motor.. I would go big cams if I had a built motor, solid lifters, cnc ported head, blah blah blah and rev it's mum to 10k rpm witha  sequential box.

But nah.. it's a stocker heap of shit.

Goal: 400kW stock bottom end.

It can still do it! lol

2 hours ago, WMDC35 said:

It can still do it! lol

LOLOLOL.. yeah and watch a few rods go through the block when the rest of the Ringlands are smashed and snag on the cylinder walls lololol

21 hours ago, Dose Pipe Sutututu said:

LOLOLOL.. yeah and watch a few rods go through the block when the rest of the Ringlands are smashed and snag on the cylinder walls lololol

See no worries, you'll still have a few rods in there, gotta keep it positive lol

le siet bok updates, pulled off cat (turbo shrapnel filter) tapped out bits of engine and turbo:

20170122_172936.jpg

then went onto disconnect all the hoses, accessory loom, blah blah blah. Removed the AC compressor, powersteering pump and cabled tied them both out of the way (don't want to regas because tight arse asian). Removed nuts on engine mount. And yes, something had to go wrong.. ended up snapping the coolant hose connector that goes from motor to firewall. Lucky wasn't the heater core hose fittings. 

20170122_172946.jpg

And yeah, managed to take off the bonnet on my own, aesthetics - not really I've gone fat.

20170122_172926.jpg

So now, as you may have seen in the WTB section, I'm searching for a motor being a neo or just a built rb25det. Let's see how that goes :)

Unfortunately with so much going on, I won't have much of a budget to fry. Just waiting on NST to go up in price and I'll sell my shares to build this turd into a glorified fast turd. 

 

  • Like 3

so yeah, a bit pissed on straya day but the motor came out.. barely... I forgot to remove the shifter LOLOLOL... 

We were like wtf.. the motor and box was jammed, looked underneath and "f&%k c&_t, piece of shit c¥×t"... so motor back in ish, then shifter out then round 2 and now we're here!

IMG-20170126-WA0021.jpeg

  • Like 5

Happy Lunar New Year, also treated myself to a new trolley jack because it's red and red is a good colour during the New Lunar Year lolol.. (I have 2x jacks now lol..)

20170128_120642.jpg

Also took the box off, and yep that's it for now.

20170128_124936.jpg

 

On 28/01/2017 at 2:04 PM, V28VX37 said:

Show us the block and pistons Johnny!

soon my friend, the gearbox bolts are too short to mount the engine onto the stand lol.. need to sort that out first!

 

20 hours ago, Manuel Kasko said:

Engine for sale in VIC

 

After a built motor in Sydney, but thanks anyway man!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...