Jump to content
SAU Community

Recommended Posts

 

Hello all,

 

For sale is my 1995 R33 GTSt log booked race car.

 

Attached are some old photos of the car which are 99% how the car sits now, I have also attached the old dyno sheet. I was very conservative on the dyno as I was really after response and longevity out of the package not a huge dyno number.

 

The car has the below modifications:

 

· HKS cams 256/264

· HKS exh cam gear (VCT remains on the inlet)

· HKS timing belt

· N1 water pump

· Low temp thermostat

· Plazmaman Plenum

· 550cc injectors

· Walbro in tank pump

· Nismo fuel pressure reg

· GTR intercooler

· Custom stainless steel intercooler piping

· Turbosmart BOV

· 10 row oil cooler with remote filter

· Z32 airflow meter

· Apexi Power FC computer

· Apexi AVCR Boost controller

· Stainless steel high mount manifold

· GT3071R turbo with 0.64 rear hsg ( also has a spare 0.86 ceramic coated rear hsg)

· Tial 38mm wastegate

· 3” exh with no cat ( comes with a cat to bolt in if required)

· Custom 10 ltr sump

· Splitfire coil packs

· Rear head drain

· Ross racing balancer with reduction on W/P and P/S ( A/C removed)

· 5 puck brass button clutch

· Nismo short shift gear stick

· Nismo gear knob

· R33 GTR Brakes, RDA rotors, Hawk pads

· Patrol master cylinder

· Braided lines

· In cabin mounted bias adjuster

· Stack dash with shift light

· 1.5 way mech LSD

· Alloy bushed rear sub frame with alloy spacers for roll centre adjustment and sub frame pitch adjustment

· Complete interior strip out and paint

· 6 point weld in cage with cross in main hoop and rear legs

· OMP WRC drivers seat

· Sparco Passenger seat

· OMP passenger foot rest

· Takata drivers harness

· Sparco passenger harness

· Selby sway bars front and rear

· Various Whiteline bushes throughout the car

· Completely stripped out wiring and interior and race prepped.

 

 

The wheels are Advan’s and have old RE55’s on them 17 x 8 front and 17 x 9 rear. The suspension has been removed from the car that I was running as it was built to suit a non-roll caged car and it did not really benefit the chassis. I was looking at updating the rear hubs to R34GTR alloy items and then getting new suspension made to suit. I have since fitted some stock suspension so it can roll around.

 

The next phase of the car for me was to fit some equal sized wheels in either 8” or 8.5” with 245 tyres all round and order a set of custom MCA or DMS suspension to suit the car ( R33 GTST front and R34GTR rear with custom dampening spec).

 

The car is a great safe race package and the chassis is where I wanted it I just wanted to work on the unspring mass, tyres and suspension. It will be a shame to see the car go but I clearly don’t see me having the funds to utilise it like I used to and how it should be.

 

The car is log booked as a sports sedan and the vin and chassis number are still ok to be used on the street if ever required. This was my daily driver and I have owned the car for the last 12 years.

 

The only reason it is being sold is due to a divorce that has finically ruined me and I don’t see me being able to have motorsport as a hobby again till I am much older and I am more financially stable, so I need to move the car on to someone who will be able to use it.

 

I also have a car trailer with 3 mtr ramps and electric brakes I used to tow the car around on which I am happy to let go also. There are also spares that I could throw in with the car which I can go into more detail if you or anyone is interested.

 

The car is in storage where it has been on stands for the last two years.

 

I have to move it from its current location and will get some updated photos by the end of the month.

 

I am chasing $13,000.00 for it with all the spares which includes a disassembled short block and ready to go overhauled head. The trailer will be extra but am happy to negotiate a deal.

 

Feel free to PM me and I will share my mobile number to discuss further.

 

I am located in Newcastle NSW.

 

Regards,

 

Ryan

IMG_1486810996.655874.jpg

IMG_1486811009.172815.jpg

IMG_1486811021.139631.jpg

IMG_1486811037.755906.jpg

IMG_1486811050.574105.jpg

IMG_1486811063.279264.jpg

IMG_1486811073.922883.jpg

IMG_1486811086.288414.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/469030-log-booked-r33-gtst-race-car/
Share on other sites

Damn what a great starter for someone looking to get into racing! Worth it in parts alone.

If only I had the space...

GLWS I'm sure it won't last :)

Thanks Birds

It was a massive part of my life for many years but now I feel it needs to go to someone like I was to save them some money and enjoy it.

I will miss looking at it.

Fingers crossed it sells fast it was hard enough posting the add haha

  • 2 weeks later...

I purchased a new battery yesterday and and moving it on the weekend to another storage location. I will take some more pictures of it then.
I am negotiable on the price within reason and am happy to bundle the car, spares and trailer.

Ryan

  • 2 weeks later...
  • 1 month later...
  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...