Jump to content
SAU Community

R32 GTS-T - Headlight Permanently On

32_love

By 32_love,
in General Maintenance

 Share

Recommended Posts

32_love Collaborator

32_love

Posted
Posted
R32 GTS-T - Headlight Permanently On

Last Friday, when I was leaving work, I discovered the remote wouldn't unlock my 32. The car is alarmed, so I didn't want to try opening it with the keys (in the end this didn't matter anyway)

I assumed I had left my headlights on and decided to return the next morning with a mate to jump start it.

When we returned the next day, we discovered the battery was completely dead. However, I hadn't left the headlights on so I was confused as to why the battery died.

With keys in my pocket, we fitted the new battery and immediately my passenger side headlight turned on. (Normal headlight, not hi-beam or fog etc.)

I was able to start the car, and flicking the headlight knob turned the drivers side headlight on. Flicking the knob in to the off position, the drivers side light turned off and the passenger side remained on. (This was not a problem previously, however I suspect it is the cause of the dead battery)

For a few weeks prior to the battery dying, my passenger side indicator had been doing the 'double-speed' thing. To be honest, I had just ignored this.

Now, that indicator works properly, but I still have the headlight problem.

Has anyone encountered this before? Or knows where I should start looking?

 

Thank you for reading,

 

Aaron

Link to comment
https://www.sau.com.au/forums/topic/469068-r32-gts-t-headlight-permanently-on/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

Yes, either the switch or the headlight relay has failed. Can you tell if it is regular or high beam that is stuck on?

The relay is easiest to start with and only impacts your high beam flashing. Under the bonnet near the battery is a small black fuse box, find and remove the headlight relay. It is probably brown. If the headlight goes out you just need to replace that relay, and everything is fine to drive in the meantime if you can't get one straight away.

If that makes no difference, or if it is the low beams that are on you need to remove the steering column surround to get to the wiring for the headlight switch. Once you get there unplug the wiring from the switch, if the light goes out you need to replace the switch. If that's the problem people like Just Jap keep them in stock because they are failing more often as the cars are 30 years old.

If it's not that....head to an auto electrician :)

  • Like 1
32_love Collaborator

32_love

Posted
  • Author
Posted
29 minutes ago, Duncan said:

Yes, either the switch or the headlight relay has failed. Can you tell if it is regular or high beam that is stuck on?

The relay is easiest to start with and only impacts your high beam flashing. Under the bonnet near the battery is a small black fuse box, find and remove the headlight relay. It is probably brown. If the headlight goes out you just need to replace that relay, and everything is fine to drive in the meantime if you can't get one straight away.

If that makes no difference, or if it is the low beams that are on you need to remove the steering column surround to get to the wiring for the headlight switch. Once you get there unplug the wiring from the switch, if the light goes out you need to replace the switch. If that's the problem people like Just Jap keep them in stock because they are failing more often as the cars are 30 years old.

If it's not that....head to an auto electrician :)

You're a legend. Thank you for all that info.

I'll give all of that a go. Unfortunately it appears to be the low beams, but I'll still check it all out anyway.

 

32_love Collaborator

32_love

Posted
  • Author
Posted
1 hour ago, jmknights93 said:

Hey mate,

If it turns out that you need a new indicator stalk/headlight switch I have plenty of these spare. PM me if you need one or the other. Happy to help out.

Cheers. 

Thanks mate, much appreciated.

I probably won't get to look at it until the weekend, but I'll definitely msg you if that's what I need.

  • Like 1
niZmO_Man Grand Master

niZmO_Man

Posted
Posted

Pull the cluster surround off, then pull the headlight switch off. Pop the cover off and inspect the pins.
My car came with a burnt plug (probably caused by crappy 100W bulbs). I spliced a good condition plug in and wired up some relays for the headlights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Omg Brake pedal removal.. FML!!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
×
×
  • Create New...