Jump to content
SAU Community

Recommended Posts

That's an expensive set of nice wheels. Don't spoil it by putting stupidly narrow stretched tyres like some people do!

Something like 285 35 may do the job. If the tyres stick out too much make the guards bigger don't shrink the tyres!

  • Like 6
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7821762
Share on other sites

I ran 275x35x19 on my R34 GTR (work d9r 19 x 10.5 +15), which is mildly lowered. I couldn't go full lock without scrubbing on the inner guard linings on both sides.

I went down to a 275x30x19 tyre and used a heat gun on my inner linings. No scrub whatsoever now.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7822513
Share on other sites

9 minutes ago, OV33RR said:

275/35r19 there pretty big dont think id like to go bigger scrubbing as it is

I understand - but then why go 10.5 wide if your not going to put the appropriate tire on there.

The below is 10 wide with a 285 - see how the sidewall is square - surely that will give the car better turning and handling - please someone correct me if I'm wrong. 

IMG_1513.JPG

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7824201
Share on other sites

  • 2 months later...
16 hours ago, vxsr33 said:

From what i have read 275 or 285 is the recommended width for a 10.5 inch rim. 275 on a 9 inch rim isn't recommended as its too wide.

275 on 9in wheels are within the LVTA guidelines but the proof of the pudding is in the photos - OPs tyres are clearly stretched and the above 285s on 10 in wheels look just right.

Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7838260
Share on other sites

  • 3 weeks later...

I've got the same wheels offset etc, previously I had 275/30 no scrubbing now I have 275/35 19's nitto nt05 scrub the inner and outer guard. Then again mine isn't ride height, I wouldn't go anything thicker then the 30 series unless u want to do some suspension and camber work. My front is at 3 degrees camber to prevent my guards ripping again.

 

Link to comment
https://www.sau.com.au/forums/topic/469878-19x105-te37sl/#findComment-7841048
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's one of the reasons I got that breed, they look weird, the other reasons are they small, they are very vocal, and run around like they are on crack, I didn't want a breed that just sits around, these two are like kids on red cordial  My daughter has one, and it's a laugh riot, constantly doing Parkour around the house, sits on her shoulder, plays catch, and constantly runs around the house taking turns chasing the dog around, her Bermese though, just lays around with constant bitch face, and just looks on in utter disgust at the cat and dog playing together 
    • I'm getting PTSD flashbacks seeing that name again.  With my turbo swift, I got 1,500km of street use on a Jim Berry clutch before it exploded and took out my input shaft with it. 
    • It always seems the uglier an animal is the more is costs
    • It's all about the socialisation of the dogs. In that first 8 to 16 weeks of age they need to be taught to be nice and friendly with everything. That way they generalise it to everything. That said, some days you'll just never beat genetics, but 99% of the time dogs chasing cats is purely lack of socialisation, and then the chasing part can turn into prey drive.
    • I bench bled my HFM BM57 before installing, it leaked badly. Threw it in the bin, because I installed it 2 years after purchase.
×
×
  • Create New...