Jump to content
SAU Community

Recommended Posts

12 hours ago, Dose Pipe Sutututu said:

Not bad at all, just need to brake later :)

 

Thanks man! I've had a fair few detailed tips from a few mates who are alot faster than me. So that'll give me something to work towards next time :)

Also, I had a little fiddle this afternoon and managed to get the harness bar mounted in nicely. Need to machine up a couple of new spacers to make it fit perfectly. Although it's not too bad now.

I want to run this:

1. So I can use my harnesses safely, the bar is setup to be level with the top of my shoulders. I am waiting for my other harness to arrive.
2. So I have somewhere better to mount the GoPro, so it doesn't look like I'm filming from a potato... ?

Anyway, here is a couple of photos.

VI9XYJ7l.jpg

JR5DrR9l.jpg

RDu1nIcl.jpg

  • Like 1
1 hour ago, Dose Pipe Sutututu said:

Sexy!

Are you running the same front caliper as a GTi-R?

I'm actually using A32 Maxima front calipers and rotors man. 

Twin piston calipers 280mm rotors.

Rears are a mash-up

Essentially A32 Maxima setup

Although on an N14 its not a plug and play unlike an N15. 

GTiR rear calipers with A32 Maxima caliper brackets and Ford Focus ST170 rear rotors (280mm) machined down to 278mm same as the Maxima. 

 

GTiR rear calipers are the same physical caliper as the A32 rear, just the caliper bracket spacers the caliper out. 

21 hours ago, Dose Pipe Sutututu said:

Interesting! That's pretty cool man! 

If you get a bit more competitive I reckon have a chat to Intima Brakes Australia, they love sponsoring grass root motorsports!

I want to keep this car street registered or at least right on the border lol, hence no cage, so no full on serious racing for me.

I will have a shitload of fun doing some 'club' type track days in it though, especially with the wife on board with it all ;)

  • 2 weeks later...

Alright guys, another parts accumulation post.

I bought myself a 4 point underbody brace from Whiteline, I'll fit it up and re-wheel align before the next track day :)

P.S

I've got a bigger post coming, it's more parts accumulation, although I think you'll like it.

 

1jgpVfWl.jpg

Okay, another update. I have had this in my hands for some time now, although I haven't posted any images just yet, so here they are:

This is a SR16VE N1 intake manifold off the JN15 VZR N1.

These intake manifolds have a larger throttle body and better designed runners than the SR20VE, their only downfall is they are designed for a 1.6L, so the diameter of the runners is a little small.

 

I sent the manifold over the AMMFAB in the US as his work is second to none, especially his welding on cast aluminium.

The runners were ported out excessively, same as the plenum. This is the intake manifold I plan on running on my built 20VE once finished.

 

The N1 manifold have been proven in the past once ported to within an inch of their life. So I am hoping this one will be the same.

 

The plan is to have the manifold and TB ceramic coated in silver to keep it looking nice and bright.

 

Enough jabbering and time for some photos:

 

UlLK5Cgl.jpg

 

uUJfiFHl.jpg

 

jfyQ5aNl.jpg

 

VZcXwl9l.jpg

 

 

 

3SSe5XWl.jpg

 

oulmpNYl.jpg

 

6dGLUTxl.jpg

 

nIMceRyl.jpg

 

LGvKXS6l.jpg

 

m5teZfYl.jpg

 

vsKxAAEl.jpg

 

v5g2EBUl.jpg

 

uw8IVkCl.jpg

 

nsHQdNJl.jpg

 

Wd0PjaQl.jpg

 

ilX24r8l.jpg

Edited by TimmyMA70
  • Like 3
3 hours ago, Jordy32 said:

Oh wow, you're not kidding about it being ported to within an inch of it's life

Definitely don't kid, lol. I'm really keen to see how it performs though! 

2 hours ago, Ben C34 said:

That's some nice work.

Thanks Ben, hopefully the work pays off mate. 

2 hours ago, Dose Pipe Sutututu said:

Wow, amazing! 

Can't imagine that being more cost effective than a tank of nitrous but hell cool!

?? she's always going to be strictly N/A, no swaying me there matey. 

Definitely won't be as cost effective though, you're right. 

16 minutes ago, WantGTR said:

So much this. Gassed my pulsar way back on my Ps. Dollar/hp cant be beaten.

I really love an unassisted N/A screamer ?

Unfortunately $/hp sucks quiet alot in that respect. That's why I put the N14 on a diet ?

  • Like 1

Gas is just like the icing on the cake. A single fogger wet system is easy and cheap to setup. 

You can still have a crisp AF na screamer.... with an ace up your sleeve ?

Having an n14 before i regularly check this thread lol

Edited by WantGTR
.
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...