Jump to content
SAU Community

Recommended Posts

So they have been kicking around for a year or two in some cars and looks like a few of us have taken the plunge and made a purchase so just wondering what information is out there.

6 speed sequential that fits inside the standard GTR 5 speed case and bolts straight in. Got a nice load cell and rotary position sensor so you can set up closed loop flat shifts with a decent ECU. Gear ratios seems very sensible and friendly at 2.706 / 1.894 / 1.471 / 1.184 / 1.000 / 0.812 but have no options. Big 26-spline input shaft so requires a new clutch and rated at over 1000hp. Fair bit cheaper than a Holinger (with all the extras you need), Albins (which needs to have floor cut) and around the same price as an OS88 but with a lot more tech.

Seems they have run into a few issues along the way but have been quickly fixed under warranty and new versions have been introduced to fix. Claims of 38ms shifts (probably more like 50ms) is still crazy fast if set up correctly.

Who is running one? How easy was the ECU set up for flat shift? Anyone keen to share some experience or settings?

ppg%20sequential.JPG

 

Edited by SimonR32
Link to comment
https://www.sau.com.au/forums/topic/473151-ppg-6-speed-sequential-for-gtr/
Share on other sites

21 minutes ago, Griffin said:

How much are they? ( I've heard the saying re if you need to ask you can't afford).

How user friendly street wise are they?

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

  • Confused 1
1 hour ago, sneakey pete said:

Is that a drive away price?
eg clutch, wiring tuning ecu around it etc? Or just the cost of a completed box?

No clutch.

No installation.

No tuning.

You get that.

0E157731-7EBC-4C10-B668-B13633D9B34B.jpeg

20 hours ago, Piggaz said:

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

I swear they have just jumped in price on High-Octane website?

 

9 minutes ago, SimonR32 said:

I swear they have just jumped in price on High-Octane website?

 

I bought mine when they dropped the price to $19,800. That doesn’t include the housing, shipping or assembly. It has gone back upto the “normal” price again.

  • Like 1
  • 2 weeks later...

So they definitely (in my case anyway) don't bolt straight into stock housing. There is 3 places that need clearancing, 2 for the selector forks and 1 for 6th gear. In saying that, a die grinder and flapper wheel makes it reasonably easy and not too time consuming.

20180128_120341.jpg

20180128_120332.jpg

  • Like 2
  • Thanks 1

For some info on setup you could try b2r motorsports in Ingleburn nsw, they have a fairly big build r32gtr with the ppg in it. Set up very nicely with a link ecu. they ve spent a lot of time getting it right. And it works very well. B2R Motorsports fb page has some videos of it.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...