Jump to content
SAU Community

Recommended Posts

Hello Andrew,
Maybe really dumb Q but will extra electrical output overload stock spec fuses?
What else will I need to upgrade to run uprated alternator safely?
Thanks mate. 

Personally I would run a new 8g line from alternator to battery as the factory alternator reliability issues with the connection at the main fuse block

As for pics and specs it all with my cnc man, once he is finished I will post up.
  • Like 1

I would be 1000% down for this if i had not already commited to an ard one. The place i bought it from (pm me if you want to know) has been taking the piss really. I ordered it in November. Delays... delays... i bet it will be late at the end of this month also...

Interested.  I'd also be interested if you have any options with higher output (150+)

You can get 150A,160A,180A,220A alternators from USA market is huge for ls engines and accessories. I saw last night 220A Alternators for $200 usd new. All you'll need is my mounting kit and your ready to roll.

The sense wire and idiot light connection is the same as factory so it plugs straight in. The power/ charge line need a bigger eyelet ring terminal fitted which is supplied or you can drill out the factory ring terminal eyelet to suit.

Picked up my alternator kit from Rat32r yesterday. Was a pleasure doing business. I can say to anyone thinking of getting one, he was honest, knowledgeable and true to his word. The product looks the goods.
I will report back once it’s fitted to my car.
Again, thank you mate.
Here is the photos you f it out of the car for anyone interested.
IMG_6459.jpg
IMG_6460.jpg
IMG_6461.jpg
IMG_6462.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...