Jump to content
SAU Community

R33 gtst Slight missfire on idle... Spark plug gap suspect


Recommended Posts

Hey guys, ive done some reading up on this but want to get other peoples opinions on changing spark plug gap and whether it will affect my tune. So far i've checked coil packs and replaced with brand new splitfires, new ignition module a few years ago, new fuel pump and injectors, New z32 afm, all vaccum hoses replaced as well as headgasket and intake and exhaust manifold gaskets with genuine nissan items. Tps and aac valve are both relatively new as well. Car is tuned on e85 running a power fc. Made 408rwhp on stock motor and pulls hard with no missfires or hesitation. The only time it does miss is on idle and seems to splutter a bit under 2500rpm. Its only a very slight miss like a cylinder dropping sound but is more noticeable when warmed up. Im running ngk bcpr7es plugs gapped at 0.8 but was wanting to see if 0.9 gap would iron out any idle miss im having and not massively affect my tune. Cheers guys

^^^ as per GTSBoy says, That gap is only needed when you're boosting.  At idle or just above, it won't matter.  Generally at idle you could have just about any gap in the 1.2 to 0.8mm range and it wouldn't matter.

See if it still happens with your A/C turned off.

Cheers for the input so far guys. So with the a/c switched on there is literally no miss! It idles at 1000rpm but the miss comes back when its switched off. Once the car is at operating temp it idles at around 850-880rpm. I also noticed when i unplug the o2 sensor the miss goes away completely but the afr's drop to around 13 on idle instead of sitting on around 14.7 which i imagine is normal as it was tuned with the o2 sensor. Does this mean theres an issue with my o2 sensor or possibly the wiring?



Missfire on idle? That's just called 'having any RB engine'


Thats what the tuner said too lol he couldnt pick up any faults with anything but surely it cant be normal. It sounds shit on idle! Slight miss every few seconds rather than idling super smooth like it did before. Oh well i might just have to live with it then
O2 sensors get old and slow.  The heaters also stop working and they don't then work when cold (ie at idle).
O2 sensor was also replaced not too long ago with a genuine nissan sensor as previous one was getting on.

Just an update guys...had a mate of mine double check the gap on my plugs and turns out it was only around 0.5mm! Pretty pissed off as a reputable tuner gapped them for me too! Anyway they're now gapped to 0.8mm and no more miss what so ever and the car obviously feels smoother too. So...yes, spark plug gap can affect a cars idle lol

I wouldn't call someone that doesn't know the difference between 0.5mm and 0.8mm spark plug gap a reputable tuner. Did they have a reason for the small gap?
He didn't mention anything to me about the small gap. He told me he was originally going to gap them down to 0.8mm. The plugs really shouldnt of needed much adjusting anyway as the bcpr7es come pre gapped at 0.8mm. He was also trying to say the miss was a 'skyline' thing lol the car feels great to drive but now im a bit skeptical on the tune if he cant even gap plugs.
15 hours ago, Ty1 said:

but now im a bit skeptical on the tune if he cant even gap plugs

Yeah I'd be too. It's strange when people say "reputable tuner", where did they get the reputation from? Instagram/Facebook or here on SAU? Or did they start off good and then got lazy/sloppy/dodgy (reminds me of a certain welder)?

Yeah I'd be too. It's strange when people say "reputable tuner", where did they get the reputation from? Instagram/Facebook or here on SAU? Or did they start off good and then got lazy/sloppy/dodgy (reminds me of a certain welder)?
I totally agree with you! The tuner did look after me though during the whole process and didnt charge me for a couple of dyno runs as we were diagnosing issues. And from what i could tell, he was a very honest, upfront guy. A mate of mine recommended him and a few of the boys on sau have had good results too. Im not too familiar with the pfc hand controller but is there a way i can view the fuel map/settings and post a pic on here so someone might be able to tell me if it looks like a decent tune?
On 28/04/2018 at 7:52 PM, Ben C34 said:

Keep in mind it probably wast the turner who gapped the plugs, could have been a different guy so not really fair to blame one guy

Yes sorry, I meant to finish off my previous post with this but I got distracted and hit the post button too early.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...