Jump to content
SAU Community

R33 GTST major service

eVo25t

By eVo25t,
in New South Wales

 Share

Recommended Posts

JGTC Proficient

JGTC

Posted
Posted (edited)

What part of Sydney are you in?  Just had the same done for my R34 by Mark at MRC Performance & Dyno in Castle Hill, very knowledgeable with all things RB, also the best troubleshooter i've been to, he's solved many issues other repuatable workshops either caused or hadn't picked up on.

They offer a really good health-check / inspection which includes a quick run on the dyno to make sure all is in order also, mention this as it's really worth the $120 odd dollars so you know what you're up against for future mods etc.

If it helps break the ice, mention Daniel with the black R34 GTR suggested you call.

https://www.facebook.com/MRCDynoServices

Edited by JGTC
The Bogan Grand Master

The Bogan

Posted
Posted

What do you consider a major service?

If it's a basic fluids, plugs, filters type of thing invest in a good jack and some jack stands and do it yourself.

You will save thousands over time.

Nothing about it is hard.

If you cannot see yourself doing a timing belt, if that's required, any local good garage can do that, just get them to do the timing belt, water pump.

The problem with getting basic work done at "tuning shops" is that they cost alot of money, this is a fair thing though because you get what you pay for, usually, but that is really only required for their technical expertise, there is nothing technical about doing the basic service stuff.

Plus money saved can be better spent on parts, or shiny things for the missus to take her focus of the car parts that she found stashed in the garage.

Plus there is nothing more satisfying than working on your car.

Basic service parts cost around $100 - $150 dependent on parts required.

 

The Bogan Grand Master

The Bogan

Posted
Posted
14 hours ago, eVo25t said:

I'm talking timing belt, water pump, gearbox oil, diff oil and probably needs a dyno run too. I'm stuck because I moved to a unit and dont have all my stuff anymore

 

 

I've never used one but here is an option, maybe, depends on cost though.

 

https://www.diyautogarage.com.au/about/

GTofuS-T Grand Master

GTofuS-T

Posted
Posted
4 hours ago, mlr said:

I've never used one but here is an option, maybe, depends on cost though.

https://www.diyautogarage.com.au/about/

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

  • Like 1
The Bogan Grand Master

The Bogan

Posted
Posted
28 minutes ago, GTofuS-T said:

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

I would love to start up a shop like that, with a gym with only racks and free weights

Oh, and a bar

It would be just like my old garage, only without the comments of, "how long are you gonna be", "can you keep the noise down", "how much have you drunk", "do you think it's a good idea to drink and train/work on the car in the state your in".

That shit gets tiresome..

  • Haha 2
The Bogan Grand Master

The Bogan

Posted
Posted
2 hours ago, r32-25t said:

Must wear safety glasses at all times, f**k that

Only a small inconvenience.

I actually aways wear safety glasses whenever I'm under the car, usually if I got shit in my eye working under the stands my head would bounce between the floor and some part of the undercarriage at least 10 times....

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...