Jump to content
SAU Community

Power FC won’t connect to laptop

Lucas_r33

By Lucas_r33,
in Engines & Forced Induction

 Share

Recommended Posts

Lucas_r33 Rookie

Lucas_r33

Posted
  • Author
Posted
12 hours ago, GTSBoy said:

So what are you using to connect it? USB-serial adapter?

My mate has the proper Alexi software and plug in adapter to the USB.

It’s a “razor performance” USB adaptor or something, I’ll ask.

 But yeh, it’s all the official software and all.

GTSBoy Grand Master

GTSBoy

Posted
Posted

USB-Serial adapters are famously a pain in the arse.  There are basically 2 or 3 chipsets in all of them.  Some of them just do not work with different peripherals.  Others work fine.  I have no knowledge of what works with the PFC.

Assuming you can get the converter to play ball with Windows, the PFC software will want to be talking to a particular COM port.  You will have to check that in the software's config and then you will want to see (in device manager) that that COM port is actually being provided by the adapter.  Sometimes you get silly shit, like the software only allows you to choose between COM1 to 3, but the adapter only provides COM15 or something equally stupid.  Sometimes there are ways to fix that sort of problem, sometimes it's just a case of trying another adapter.

  • Thanks 1
Lucas_r33 Rookie

Lucas_r33

Posted
  • Author
Posted
7 minutes ago, GTSBoy said:

USB-Serial adapters are famously a pain in the arse.  There are basically 2 or 3 chipsets in all of them.  Some of them just do not work with different peripherals.  Others work fine.  I have no knowledge of what works with the PFC.

Assuming you can get the converter to play ball with Windows, the PFC software will want to be talking to a particular COM port.  You will have to check that in the software's config and then you will want to see (in device manager) that that COM port is actually being provided by the adapter.  Sometimes you get silly shit, like the software only allows you to choose between COM1 to 3, but the adapter only provides COM15 or something equally stupid.  Sometimes there are ways to fix that sort of problem, sometimes it's just a case of trying another adapter.

Thanks heaps, we will have a look into it and I’ll post if we figure it out ??

89CAL Grand Master

89CAL

Posted
Posted

Google "PaulR33 Power FC FAQ'

There may be something in there. As per above, I think the Apexi softwear you have to manually choose the COM port, but FC Edit I know has an auto function to work out which COM port is being used. However this does not always guarantee it will work

Generally it will default to COM1 but if you are running windows, you should be able to go to hardware manager and see the USB to serial device there and it will either tell you what COM port is set in the properties or allow you to choose one

Be aware that the outdated PS/2 cables that Power FC's use are tempremental at times and I have seen them play up if they have been bent, squashed or mistreated. If you have a handcontroller and it works, either something to do with the cable/box for connecting to the PC is stuffed, or you have a hardware/setting problem with the PC.

As per above, some USB to serial adapters are terrible and some work flawlessly.

  • Thanks 1
Lucas_r33 Rookie

Lucas_r33

Posted
  • Author
Posted
26 minutes ago, 89CAL said:

Google "PaulR33 Power FC FAQ'

There may be something in there. As per above, I think the Apexi softwear you have to manually choose the COM port, but FC Edit I know has an auto function to work out which COM port is being used. However this does not always guarantee it will work

Generally it will default to COM1 but if you are running windows, you should be able to go to hardware manager and see the USB to serial device there and it will either tell you what COM port is set in the properties or allow you to choose one

Be aware that the outdated PS/2 cables that Power FC's use are tempremental at times and I have seen them play up if they have been bent, squashed or mistreated. If you have a handcontroller and it works, either something to do with the cable/box for connecting to the PC is stuffed, or you have a hardware/setting problem with the PC.

As per above, some USB to serial adapters are terrible and some work flawlessly.

Sweet, thanks heaps for the info ??

We’ve used thesame set up to tune 2 bother power FC’s (brothers r33 and our track car).

ill have a look at paulr33’s stuff now ☺️

Birds Grand Master

Birds

Posted
Posted

Using an FC Hako I end up having to fk around with the com ports nearly every time. It eventually works but it comes down to me remembering which USB port it's supposed to go into and a combination of opening the app after connecting or connecting while the app is open or connecting before ignition on and waiting for the moons to align. But it does eventually connect...fortunately there's rarely someone behind me at the servo when changing tunes over with it.

  • Thanks 1
Lucas_r33 Rookie

Lucas_r33

Posted
  • Author
Posted

UPDATE!

So I pinched my brothers controller.

when I plug it in, the revs spike a little bit.

on the controller, twice the logo popped up then turned off, once it went through to the menu then cut out again.

the ecu works, just having issue connecting it to anything.

 

PLEASE HELP!

i don’t want to think I got ripped on a shit ecu

Lucas_r33 Rookie

Lucas_r33

Posted
  • Author
Posted
1 hour ago, KiwiRS4T said:

Does your brother have a Power FC as well? Try swapping it over. Better to repair or replace your ecu before you waste the tuner's time (and your dollars).

He does, we have 3 in total, one in our track car, one in my brothers and my faulty one.

weve plugged the track car one in, tuned it our selves and it ran great.

just wondering if there’s any way around the fault or a way of fixing it.

the software and plug we used worked fine on the other 2 FC’s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...