Jump to content
SAU Community

Recommended Posts

17 hours ago, Caleb_M35 said:

Cleared it ?

Can I have your rego number? cheers :P

 

But seriously, there should be some sort of workaround for this, if you set up your headlights properly. I think a state or two in USA have workarounds so you can retrofit (as in take headlights apart and put in HID projectors) your crappy halogens for an actual working setup. Anyone with R32 projector headlights will know how shit they are, regardless of what bulb you put in there. OE HID (even if it doesn't have self levelling and washers) should be able to be "engineered". At the moment it's adaptor plate + H1 bulb (which will make the headlights crap), might as well take out your front brake pads.

On 11/27/2018 at 4:58 PM, GTSBoy said:

Money have to change hands?

Thankfully not 

10 hours ago, niZmO_Man said:

Can I have your rego number? cheers :P

 

But seriously, there should be some sort of workaround for this, if you set up your headlights properly. I think a state or two in USA have workarounds so you can retrofit (as in take headlights apart and put in HID projectors) your crappy halogens for an actual working setup. Anyone with R32 projector headlights will know how shit they are, regardless of what bulb you put in there. OE HID (even if it doesn't have self levelling and washers) should be able to be "engineered". At the moment it's adaptor plate + H1 bulb (which will make the headlights crap), might as well take out your front brake pads.

If the OEM HID headlamp setup is legal and safe in other countries it should be legal globally IMO. Who are we to question the revenue raisers known as Road Policing Command/ADR though...

On 11/29/2018 at 8:31 AM, niZmO_Man said:

Well it's only legal in Japan, strangely enough they use salt on roads and don't require headlight washers.

As well as Russia, Canada and other countries I've seen photos of M35 Stageas from.  Oh well..

On 11/30/2018 at 6:20 PM, Caleb_M35 said:

As well as Russia, Canada and other countries I've seen photos of M35 Stageas from.  Oh well..

photos of doesn't necessarily mean they're legal or compliant in those countries...

What I find ironic however, is these are illegal from a safety perspective (i.e. blinding if not correctly leveled), however SUV's which naturally sit higher than the rest of us are perfectly fine yet are equally as blinding...

On 12/2/2018 at 10:33 PM, GTofuS-T said:

photos of doesn't necessarily mean they're legal or compliant in those countries...

What I find ironic however, is these are illegal from a safety perspective (i.e. blinding if not correctly leveled), however SUV's which naturally sit higher than the rest of us are perfectly fine yet are equally as blinding...

Let's not forget the brand new SUV's self-levelling units that end up looking like a strobe light on the front of the car on QLD roads...

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...