Jump to content
SAU Community

Recommended Posts

 

Just FYI

 

The 2018 Infiniti Red Sport Q60 with 400 ponys is a bargain at $59,000 when a few people in here purchased there G35/37 for $30,000 and only got 300hp

And tuning is happening in Oz

 

A Facebook page is up about Infiniti Australia...

 

Just Fyi

Link to comment
https://www.sau.com.au/forums/topic/476953-a-new-400hp-infiniti-q60rs-59000/
Share on other sites

1 hour ago, Leroy Peterson said:
On 5/10/2019 at 5:07 PM, mlr said:
Yeap new and reliable vs ......not

Which one is which??

The Infiniti cost $60k, even adding another $10k that's only $70k to spend, what does that money buy.

A 10 year old GTR for around $75k, but would you, I personally wouldn't touch a cheap 10 year old GTR with a 10 foot barge pole.

Those things cost your kidneys when they break.

The Infiniti cost $60k, even adding another $10k that's only $70k to spend, what does that money buy.
A 10 year old GTR for around $75k, but would you, I personally wouldn't touch a cheap 10 year old GTR with a 10 foot barge pole.
Those things cost your kidneys when they break.
I wouldn't touch either, personally.
Q60 ain't gonna be cheap when it breaks either, depending on warranty conditions.

I assume resale value gonna plummet on Q60 too, going as new cars do, while GTR got a pretty strong secondhand market for 2010 and newer.
43 minutes ago, Leroy Peterson said:

I wouldn't touch either, personally.
Q60 ain't gonna be cheap when it breaks either, depending on warranty conditions.

I assume resale value gonna plummet on Q60 too, going as new cars do, while GTR got a pretty strong secondhand market for 2010 and newer.

Flip before end of warranty, easy.

I'm not saying a GTR is a bad buy, I'm saying buying from the bottom of the barrel could be a expensive endevour.

Expensive cars that are being sold at the lower end of the price scale makes my spidey senses tingle.

Opinions may vary 

I have had my Q60RS for a 1 1/2 years and there has been nothing wrong with my car... 

I’m not too sure where you guys are getting this information from, I know in the forum in America Q50/60 there have been some problems but not my car

 You can buy a 400Hp car without any tuning problems... why not !!

 

 

 

 

On 5/10/2019 at 5:54 AM, wizlb said:

 

Just FYI

 

The 2018 Infiniti Red Sport Q60 with 400 ponys is a bargain at $59,000 when a few people in here purchased there G35/37 for $30,000 and only got 300hp

And tuning is happening in Oz

 

A Facebook page is up about Infiniti Australia...

 

Just Fyi

The 1995 R33 GTS-T with 450hp is a bargain at 13k...when a few people here purchased their Q60 for $59k and only got 400hp

And tuning is happening in Oz!

1 hour ago, Birds said:

The 1995 R33 GTS-T with 450hp is a bargain at 13k...when a few people here purchased their Q60 for $59k and only got 400hp

And tuning is happening in Oz!

A 25 year old modified car with questionable reliability came into this discussion how??

31 minutes ago, mlr said:

A 25 year old modified car with questionable reliability came into this discussion how??

Just seems ridiculous to compare a 60k car to a 30k one, so thought I'd join in the fun.

As for questionable reliability...well...10 years without missing a beat at that power level. But even new VWs are "questionable".

The other 45k saved ought to more than cover anything that goes wrong until the other cars drop to the same value ?

  • Thanks 1

It’s that time Bird..

I had a 96 GTST and spent to damn much to get my car to 400RWHP but it became to old and I had to trade it in

Then I got a 2005 GT350 or G35 and that was to slow but more reliable, but that car became to old too 

 

So, now I have a 400 HP car with damn near 400RWHP but no mods yet and you can get one for that price I posted ... if you can afford one buy one ...

but we all have our opinions and yours is valid to Bird 

4 hours ago, wizlb said:

It’s that time Bird..

I had a 96 GTST and spent to much damn money to get my car to 400rwhp but it became to old and I had to trade it in...

Then I got a 2005 GT350 or G35 and that was to slow but more reliable, but that car became to old too....

 

So, now I have a 400 HP car with damn near 400RWHP without any mods yet and you can get one of these for price I posted, buy it if you can afford one, buy one ...

but we all have our opinions and yours is valid to Bird ....

 

14 hours ago, wizlb said:

It’s that time Bird..

I had a 96 GTST and spent to damn much to get my car to 400RWHP but it became to old and I had to trade it in

Then I got a 2005 GT350 or G35 and that was to slow but more reliable, but that car became to old too 

 

So, now I have a 400 HP car with damn near 400RWHP but no mods yet and you can get one for that price I posted ... if you can afford one buy one ...

but we all have our opinions and yours is valid to Bird 

This Q60 was on E85!!!

 

 

9CB6DE3C-CC17-4C4D-B94E-E468870260F3.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...