Jump to content
SAU Community

Recommended Posts

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

Link to comment
https://www.sau.com.au/forums/topic/479555-ecu-problems-on-my-r34-rb25/
Share on other sites

1 hour ago, robin schembri said:

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

 

racepace in Bayswater has installed both ECU's and tested both units to be faulty my entire set up is all brand new, I'm at the point where I don't think I want another one and was wondering if anyone had herd of there ECU's being faulty or giving people trouble.

1 hour ago, robin schembri said:

has installed both ECU's and tested both units to be faulty

Yes.....but did they test the 2nd unit BEFORE installing it? If you do Install, then test, and find it broken, you do not know if it was broken on arrival, or f**ked during/after installation. A "brand new" setup is even more likely to break something than an existing wiring setup that was known to work on another ECU.

both ecu's had different issues racepace motorsport know there stuff, they install these units all the time, but since haltech has now bought out adaptronic there seems to be issues poping up.The first ECU was running fine for five days then it had a hissy fit causing all sorts of gremlins, the second ECU had misfire issues when idling and at a certain rev range but everything else seemed to be fine, they even tried it on another car and it did the same thing.i hope someone else can enlighten me on anything they have herd on the grape vine.

Apart from the hassle I presume this is not costing you money? What has Adaptronic got to say?

A Link fan myself but Tao from Hypergear in Campbellfield has been fitting Adaptronics including to R34s with great success. Maybe give him a ring.

there has been a lot of dyno time spent solving the problems which ive been told wont cost me,but the customer service with them is a joke,there is no phone number to contact them and everything has taken way to long, they are now haltech they bought adaptronic out. racepace motorsport contacted them all last week and they didn't even have the decency to return there emails. I was going to go for a link ECU too but was convinced otherwise. Apparently the third ECU is on its way. 

I have heard of someone over at performance forums having issues with a modular ecu when they first came out. The ecu was damaged when it did an auto firmware update. Was sent back to adaptech who proceeded to charge $ to repair it. Customer was not happy to say the least. 

 

Adaptronic support used to be awesome, all my experiences with the previous gen ecu where positive, seems since the takeover things have changed unfortunately.

I asked if they would replace it with one of there haltech units they said yes, but they wouldn't refund the cost of the dyno. So it looks like number 3 ECU is on its way, what are the odds that three ECUS are faulty. 

The odds are so ridiculously high that 2 adaptronics and a Haltech spontaneously explode that it is way more likely Racepace fked it up bigtime (and caused all 3 to die).


This is also obviously pretty damn unlikely, but it's more likely than 3 ECU's randomly failing instantly. ECU's breaking at all is extremely rare, and almost always due to install error.

Make sure they point to point check every wire on the ECU loom plug before they plug it in and power it up. Check all earths are earths, all powers are powers and no signal/sensor wires have 12V or some other shitty error. Just in case.

I have had dumb arse instro-eleccies kill multiple expensive controllers and flame detectors and other stuff by plugging them in, killing them, then going to the commissioning spares and grabbing another. They eventually fix the wiring problem when they run out of spares.

thanks for that, I don't think my nerves could handle it if this ecu fails,,adaptronic has double checked the unit and passed it to be fault free, it is in transit and should be here by the end of the week.i hope everything goes to plan and I can get my car back after 4 weeks, time will tell, thanks everyone for your input makes me feel a lot better.  

3 hours ago, Dose Pipe Sutututu said:

Use a multimeter and check your voltage.

Old Nissans, could have a bad alternator /regulator and voltages could be through the roof and cooking electronics 

 

That could be difficult though.....need to get the engine running first.

19 minutes ago, GTSBoy said:

That could be difficult though.....need to get the engine running first.

Sounds like the car "was" running, then after five days these unlisted issues appeared.

Gut internet mechanic feelzzzz say electrical issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...