Jump to content
SAU Community

Recommended Posts

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

Link to comment
https://www.sau.com.au/forums/topic/479555-ecu-problems-on-my-r34-rb25/
Share on other sites

1 hour ago, robin schembri said:

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

 

racepace in Bayswater has installed both ECU's and tested both units to be faulty my entire set up is all brand new, I'm at the point where I don't think I want another one and was wondering if anyone had herd of there ECU's being faulty or giving people trouble.

1 hour ago, robin schembri said:

has installed both ECU's and tested both units to be faulty

Yes.....but did they test the 2nd unit BEFORE installing it? If you do Install, then test, and find it broken, you do not know if it was broken on arrival, or f**ked during/after installation. A "brand new" setup is even more likely to break something than an existing wiring setup that was known to work on another ECU.

both ecu's had different issues racepace motorsport know there stuff, they install these units all the time, but since haltech has now bought out adaptronic there seems to be issues poping up.The first ECU was running fine for five days then it had a hissy fit causing all sorts of gremlins, the second ECU had misfire issues when idling and at a certain rev range but everything else seemed to be fine, they even tried it on another car and it did the same thing.i hope someone else can enlighten me on anything they have herd on the grape vine.

Apart from the hassle I presume this is not costing you money? What has Adaptronic got to say?

A Link fan myself but Tao from Hypergear in Campbellfield has been fitting Adaptronics including to R34s with great success. Maybe give him a ring.

there has been a lot of dyno time spent solving the problems which ive been told wont cost me,but the customer service with them is a joke,there is no phone number to contact them and everything has taken way to long, they are now haltech they bought adaptronic out. racepace motorsport contacted them all last week and they didn't even have the decency to return there emails. I was going to go for a link ECU too but was convinced otherwise. Apparently the third ECU is on its way. 

I have heard of someone over at performance forums having issues with a modular ecu when they first came out. The ecu was damaged when it did an auto firmware update. Was sent back to adaptech who proceeded to charge $ to repair it. Customer was not happy to say the least. 

 

Adaptronic support used to be awesome, all my experiences with the previous gen ecu where positive, seems since the takeover things have changed unfortunately.

I asked if they would replace it with one of there haltech units they said yes, but they wouldn't refund the cost of the dyno. So it looks like number 3 ECU is on its way, what are the odds that three ECUS are faulty. 

The odds are so ridiculously high that 2 adaptronics and a Haltech spontaneously explode that it is way more likely Racepace fked it up bigtime (and caused all 3 to die).


This is also obviously pretty damn unlikely, but it's more likely than 3 ECU's randomly failing instantly. ECU's breaking at all is extremely rare, and almost always due to install error.

Make sure they point to point check every wire on the ECU loom plug before they plug it in and power it up. Check all earths are earths, all powers are powers and no signal/sensor wires have 12V or some other shitty error. Just in case.

I have had dumb arse instro-eleccies kill multiple expensive controllers and flame detectors and other stuff by plugging them in, killing them, then going to the commissioning spares and grabbing another. They eventually fix the wiring problem when they run out of spares.

thanks for that, I don't think my nerves could handle it if this ecu fails,,adaptronic has double checked the unit and passed it to be fault free, it is in transit and should be here by the end of the week.i hope everything goes to plan and I can get my car back after 4 weeks, time will tell, thanks everyone for your input makes me feel a lot better.  

3 hours ago, Dose Pipe Sutututu said:

Use a multimeter and check your voltage.

Old Nissans, could have a bad alternator /regulator and voltages could be through the roof and cooking electronics 

 

That could be difficult though.....need to get the engine running first.

19 minutes ago, GTSBoy said:

That could be difficult though.....need to get the engine running first.

Sounds like the car "was" running, then after five days these unlisted issues appeared.

Gut internet mechanic feelzzzz say electrical issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • f**king around with the bro
    • Ludenham   44.2 tops day no issues  
    • Then today, I went to visit a man with an r33 hat Peter and Road and Race sorted the alignment. As it is being set up for general track/hillclimbs etc it has a heap of caster (7o), less camber than I am used to (1o front and 2o rear, as the caster looks after that in turns without the braking downsides), 3mm front toe out and 0 toe rear. Will see how that goes and track tyre wear to see if it does need more camber, but adjsustment is also limited with nismo arms and adjustable bushes at only 1 end. It does have a bent inner tie rod on the driver's side front but as it came up within spec I'll just leave that as is. So, that is getting close to my chapter of this story....could of tidy ups then a shakedown in early October before it finds a new home.
    • So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
×
×
  • Create New...