Jump to content
SAU Community

Recommended Posts

Well the old girl is going in for some major work, new custom stainless 4” vibrant exhaust, new nismo turbos, head gasket and studs, new tune with some bigger injectors will keep updated hopefully tracks opened up again when the car is done. Goes in for paint as well as I’m been collecting weather stripping for the car for about a month now. All new retainers everything gunna be just beauty!

BDE537CF-BEF9-4B0B-90F4-5A87691A4BCD.jpeg

  • Like 1
  • 2 weeks later...

Can anyone confirm that these are legit n1 turbos? They do look all good i just noticed  the compressor side looks nothing like my old n1 turbos. I know they aren’t ceramic and they are in good condition.Just want them to get me by until I get my single setup figured. I’ll be running 1.4 bar with the twins for now. 

169ED224-48C9-4A7B-BE2C-C5F124D2CE06.jpeg

59B8D723-68C4-4E60-B19D-A0951469981A.jpeg

BE3869F6-5C3A-452E-8A9E-9CF2B41468A2.jpeg

C8207B1E-7D5A-435B-8727-5B6B692FF077.jpeg

A71C3586-6067-4B5C-91D4-DC757B60F196.jpeg

New turbos fitted with the new greddy down pipe to a brand new custom 4” stainless exhaust! My buddy Rashid is super talented with the tig. We used all vibrant pieces with a vibrant muffler. Super high quality stuff turned out great!

E14736DB-4155-4E3C-BC2B-C9727860196C.jpeg

  • Like 1

after a good night of hard spirited drving, it was bvious that the new exhaust system brought the temp of the exhaust down by alot. at 1.4 bar now and the nismo injectors are at there limit......clutch slipping, injector duty cycle almost 100 now. time for some new parts!! cars never felt so good. my engine is stock minus the head gasket and seems to handle the power fine minus the clutch.

just wanted to add, if you guys are looking for 4" mufflers with a 4" inlet that is super hi flow this vibrant muffler i got sounds unreal! it is very loud but super deep. ive seen a couple threads and posts on guys looking for mufflers for custom setups with 4" inlet and didnt find much. it was this or the aes mufflers so i chose the vibrant as not many poeple do. just to be different glad i did sounds way better than the hks,tomei, or kakimoto gt1 oz(in my opinion). althought we have no laws down here at all for exhaust so might not be the best setup for places with stricter emission laws etc.

Finally got the exhaust all finished up but ended up finding a bent wastegate bracket on the new turbos hopefully just bending it back solves issue for now. Looks like shipping dropped it.

8359D3E9-86AC-479B-A8F9-43472E51AE2B.jpeg

F1CAE1B5-6618-4CD6-9E9D-6DB545BD036F.jpeg

46ED560B-4124-4ACD-97D8-5629A6AF304B.jpeg

0CE040C1-A8AE-4F30-BF03-0B187E0B9CC7.jpeg

This is the bent up bracket had a mate right fired up when I saw this. Oh well could be bombs and bullets cars almost back together gunna see how she does at 1.4 bar. Tested the wastegate with some applied air seemed fine.

2F7D71D2-EB75-4326-8CE9-CE329DF42CFC.jpeg

A3E3B87F-82D1-4C34-BF26-ADCD8D86AE8E.jpeg

Got this mount from my buddy on gtr uk for the evc looks real nice, quality built as well nice and beefy. I have five more if anyone needs one

0892C952-8407-44EE-8744-1E75703DA70E.jpeg

1 hour ago, MoMnDadGTR said:

Got this mount from my buddy on gtr uk for the evc looks real nice, quality built as well nice and beefy. I have five more if anyone needs one

0892C952-8407-44EE-8744-1E75703DA70E.jpeg

Oh far out, yours arrived before mine :( It looks awesome!

Edited by jmknights93
10 hours ago, jmknights93 said:

Oh far out, yours arrived before mine :( It looks awesome!

ya looks even flusher now as I just quickly wrapped some electrical tape around the evc to make it tighter as I didn't have the proper 2 side tape. It now sits totally flush with a proper install. josh's custom parts are unreal he also made me a dual 60mm gauge holder that mounts centre vent ill be posting pics after install.

17 minutes ago, MoMnDadGTR said:

ya looks even flusher now as I just quickly wrapped some electrical tape around the evc to make it tighter as I didn't have the proper 2 side tape. It now sits totally flush with a proper install. josh's custom parts are unreal he also made me a dual 60mm gauge holder that mounts centre vent ill be posting pics after install.

I've seen the 3D render, he was showing me last night. Looks pretty cool!

32 minutes ago, jmknights93 said:

I've seen the 3D render, he was showing me last night. Looks pretty cool!

ya mate I thought so myself, whatever the material he uses is a way higher quality than OEM parts

Custom gauge pods(centre vent direct clip in) for bnr32. I can get more if needed. Not a cheap part I may add. What good parts aren’t lol. 

DE67A45A-C279-4150-BE01-FFAA85EA2251.jpeg

4BA99F45-E806-424E-B703-8750E803EB77.jpeg

4810950F-D07F-4F63-BD1F-33F0645ACB5C.jpeg

6441C03E-F533-4C1E-BEDD-03069B8A0F68.jpeg

C19633BA-2779-4C49-9344-3DED099A537E.jpeg

Little mate likes to run around in the morning yelling geeee teeeeee arrrrree! Makes it all worth it can’t wait to hand the keys over to him someday. Found another gtr I may buy (1994 nice year)so fingers crossed on that

DCAB8F6E-051F-48CC-8895-A56683AA809C.jpeg

  • Like 1
On 15/05/2020 at 11:40 PM, jmknights93 said:

Send me a close up pic of the hks unit installed?

Here it is sorry buddy been busy. It can sit flusher than this as well I just hammered it in With too thick of tape

2895CA3B-6025-43FA-A9FD-145D44636C21.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...