Jump to content
SAU Community

Recommended Posts

28 minutes ago, PLYNX said:

Been there, done that !

A bit of tetra ethyl lead, av gas with a flick of nitro methane swizzled around with a drop of pure methanol with put hairs on your chest.

And what did you put in your car?

  • Like 1

Lol.

Guys, 1000hp engines may last a season on track. 50 laps is 150km. A year of track days at once a month (more than most) is 1800km.

Sorry but if your 1000hp engine lasts 1800 hard km.. it's still an unreliable piece of crap. And I think someone getting 12 full track days out of a 1000 hp setup, with 50 hot laps per session is beyond what it would reasonably last.

If you're measuring your engine life in hours, then.. yeah.

  • Like 1
On 21/02/2020 at 6:11 AM, GTRAAH said:

WIth the GEN 2 GTX2867R  Twin setup (below link) rated at 1000hp Is it difficult to get this kind of HP?  And around 550KW - 600KW+

Far as turbos go, with a .64 rear and .60 front that is very possible, you can even up size them to GTX3071R. I found factory exhaust setup is very restrictive, so if you can run two short 3 inches pipes hanging out side of the car along with all other supporting mods you should be able to get there.  

13 hours ago, Kinkstaah said:

Lol.

Guys, 1000hp engines may last a season on track. 50 laps is 150km. A year of track days at once a month (more than most) is 1800km.

Sorry but if your 1000hp engine lasts 1800 hard km.. it's still an unreliable piece of crap. And I think someone getting 12 full track days out of a 1000 hp setup, with 50 hot laps per session is beyond what it would reasonably last.

If you're measuring your engine life in hours, then.. yeah.

There are a lot of things I could say to this glorious demo of building a strawman argument, but the most obvious would be - what exactly are you doing in this thread if the sheer mention of 1000hp clearly triggers your fear response?

I don't think it's a straw man argument at all..

The OP clearly posted it with a view to keep it stock looking as they intend to use it as a road car, so "Stock looking" is "Stock looking, Mr Policeman observing my road car"

As many have said, there are 0 instances of this actually being done.
As many have also said, 1000hp RB26's at all, have a limited lifespan on a racetrack, measured in hours in terms of reliability, and they don't look stock.

So to answer the original question, how difficult is it to have a 1000hp, reliable, stock looking setup on the street? I'd say extremely.

You and I both know that a 1000hp setup, cruising around town is only using 50kw or something like that at 100km, cruising around. So it could last 400,000km in such a scenario.

But that isn't what people really care about when they talk about reliability. They care about how many seconds or hours of full throttle time. While 1000hp in 2020 is different to 1000hp in 1995, I still would say it's limited to drags or highway pulls and even then have limited reliability.

WTAC GTR's don't have 1000hp. They certainly don't have 1000hp, and 300,000km of daily driving, and do a track day once a month for multiple years. If you asked the owners to do that, they would definitely insinuate that something would break before then.

Motive DVD ran there stock RB 26 to what 800hp for years of thrashing.  I know not full race pace everyday.

Now will find out how there new engine lasts at 1000hp with all the fruit (still stock crank tho).

Obviously not "stock" looking.

I got told when my engine was built that 10 years (100,000km) has been seen on these engines with normal/drag and some circuit mixed in.  Seems reasonable for 600+hp.

Edited by Stixbnr32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...