Jump to content
SAU Community

Recommended Posts

Hi,

First of all sorry for my english ?
Iam looking for a Skyline R34 and in the meantime iam gathering as much info i can get.
But one i kinda dont get.
I can get R34 GT-FOUR(4WD non turbo RB25DE) way cheaper cuz nobody really wants them so much(right now)

I already asked and it is nonsense to "put on a turbo" 
So question is. What type of RB25DET i need for GT-FOUR AWD swap?
I thinked any type of RB25DET would suffice but now iam learning that "only" Stagea RB25DET(C34?) can be swaped cuz of the AWD ATESA system? Or can it be different? 

I know it is way better to just buy GT-T but this have a potential to be "good" AWD car...and i can get it like for the half of a price of GT-T
Thanks for the info...or any information about GT-FOUR version of R34(it is hard to get)

 

Link to comment
https://www.sau.com.au/forums/topic/479897-r34-gt-four-rb25det-swap/
Share on other sites

14 hours ago, Kapr said:

I already asked and it is nonsense to "put on a turbo"

This is our usual response to anyone who wants to keep their NA Skyline/Stagea/other shitbox and turbo it. From a purely realistic point of view it is a shit idea to spend money putting a turbo onto a car that was available as a turbo model. It is only a slightly less shit idea to put a turbo engine into a car that was available with that same engine.

It is FAR more sensible to just buy the factory turbo version.

Now, in your case, you maintain that NA cars are half the price of turbo cars. But realistically, once you have bought the NA car, plus all the stuff you need to convert it (engine, gearbox, ECU, wiring loom, diff, brakes, etc) and spent all the f**king time and effort on putting it in, you would be far better off just buying the turbo version to start with.

But, if you are a masochist with time to spend on engine swaps, etc, then go right ahead and start with an NA. Just keep in mind that it won't end up being much cheaper.

In your particular case, given the pain involved in an engine transplant, it would actually be a better idea to put a turbo onto your NA engine. The parts needed are available, and it is very well documented all over the 'net, including probably 10000 threads on here. Again though, you must be aware that your weak gearbox will be at peril of death after a couple of years, your open diff will piss you off, your brakes will be small for a turbo powered car and you will have to do something about engine management because the NA ECU will not play along.

Just buy the turbo car.

  • Thanks 1

Not if you want AWD though.

A GT FOUR is a great way to get a GTR, minus a body kit. Putting in the stag engine is the way to go. I would say if you do it right, a AWD Neo in there would be awesome.

However, any GT FOUR I have ever seen is at least equal to the price of a GTT, especially a coupe. So I dunno. Not Australia?

  • Thanks 1

Hi,

thank you for the answers.
Point is i dont want to buy GT-FOUR and immiedietly swap engine or put turbo on it. I just looking for the possible future option if i ended to buy some non turbo R34.
Or maybe i just keep it as it is.
But yeah...swaping or adding turbo in my country(Czech Republic) where i have never seen any skyline on the road is little bit too much i guess and even just that C34 engine would be kinda impossible to get here.

@Kinkstaah i can get R34 GT-FOUR(2door) for like 8500 EUR- 14300 AUD. 
Yeah it is not a "brand new" and it has some rust etc...BUT next "cheapest" car is GT-T one(factory no mods) but is for 25500 AUD...

But still as i said...i think it would be nearly impossible to swap engine or add turbo in my contry. 
Of course it is about money...but iam afraid that time i've got some spare money... price of the GT-T or any Skylines R34 would be somewhere else :-/ 

Another option is to try buy "cheap" GT-T from Japan auction...i saw few of them sell really cheap. Of course lot of them ar R rated (crashed) but i dont think that cars around our country will be different :-D But i need to add around 6600 AUD for the transport taxes etc...

In this scenario the best option is....

don't get a skyline

They may look cool if you don't see them around all the time, but they don't stand up performance wise stock to anything else that you could get for $25K in Europe.

Given how hard it is to mod them/bring them up to spec where you are, this is a compounding problem. You'd be better off with a Megane Cup or similar hot hatch from Europe for a multitude of reasons (performance, cost, availability of parts, local knowledge)

  • Like 4

@Kinkstaah

So...i tried find someone who has done some swaps on RB25 or at least knows how to service them.
Found at least two guys from my country :-) (one of them done tons of swap on RB engines and has the know how :-) )

I know that i can get "better" cars in here(already owned Golf GTI - blow up engine 3x times :-D )
But Skyline is kinda a dream car. 
I dont care about GT-R look a like or XXX Hp drift/drag. 
Just need to buy it and make it reliable for the future and keep it.
I know it is gonna be a lot harder to find parts but i dont mind...just needed to find someone who knows Skylines and RB engines...which i had :-)
One huge plus is that RB25 is pretty reliable engine...cant say that about TSI/TFSI :-D 

 

So a lot depends on your power goals. If you don't plan to be dragging MTM RS6s etc you can in fact turbo your Neo engine and make up to 300awkw. Then you can spend a bit on doing up your suspension and brakes and save up for a GTR gearbox and over time have quite a good street car.

There is NO "turbo kit" available for the RB25 to make it naturally aspirated to turbocharged. it does not exists. 

However, This is one of the best guide on the internet for turbo-ing a Naturally aspirated RB25:
https://www.sau.com.au/forums/topic/466795-doing-a-t-conversion-on-an-unopened-rb25de-neo-r34-gt/

 

 

Edited by Dil-Dog

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is way more science than even I would use. I just eyeball it, not even accounting for the non-verticality of the tape measure when held on the lip and the centre at the same time. +/- 2mm is good enough for the girls I go out with.
    • So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
    • So....knowing that I have a problem with power steering temps on track and another Wakefield day booked in next Friday, I've done the obvious thing They are very reasonably priced at $1650, considering they are a big monotube shock, double height adjustable (don't have to change pre-load to change ride height), one way adjustable damping and standard sized and customisable springs if you want something other than what comes with them. They come with 9kg/mm front and 4.5kg/mm front and I went with that as a starting point because I'll add adjustable sway bars too https://justjap.com/products/bc-racing-coilover-kit-ds-ds-infiniti-q50-v37-14-current#description Unfortunately they didn't come with rear strut tops so I've re-used the factory ones which was a bit of a pain. Also, the adjuster for the rear shock will be an absolute nightmare to get at, and while there are extensions in the kit I can't see any way you can actually attach or use them
    • I also had 2 bulbs blow at once, years ago in the stagea. made for a fun drive home. The issue was the voltage regulator had failed in the alternator and it was giving 15+ volts. Really, I was lucky all that was fried were the headlight bulbs. So, I'd suggest you check the voltage across your battery terminals with the car running and warmed up. Yes, you will need a multimeter to do so, sorry.
    • Good work to think to check that, and thanks for coming back to post up the outcome.
×
×
  • Create New...