Jump to content
SAU Community

Recommended Posts

Just bought a RB26 that the buyer claimed was a R34 engine. I’m confused because it has the black CAS and the red valve covers with Skyline GTR emblem plate, but it has and igniter and the older coil pack design. From my research this combination doesn’t make any sense. Out of all the threads I found about the engine numbers it’s seems that the first number correlates to the year. Can someone look up the number still?  RB26 072998A.  

Link to comment
https://www.sau.com.au/forums/topic/480125-help-identify-my-rb26/
Share on other sites

The number does not correlate to the year, they are just consecutive numbers

There are probably lots of little changes along the way in different series. Easiest one I can think of it here is a sump on it is that R34 had a much longer diff ratio that the 4.1 in r32 and r33. 

But ultimately, other than knowing if the buyer was honest I'm not sure why it would matter. They are mechanically same same one the inside

45 minutes ago, Rickyv42 said:

Yeah it came with the R33/32 coil packs and an igniter. 

Did it come with a diff and did you check the ratio (although I presume you can bolt an R34 diff on to an R33)?

2 hours ago, KiwiRS4T said:

Did it come with a diff and did you check the ratio (although I presume you can bolt an R34 diff on to an R33)?

Yeah you can (why would you?), but you can't go the other way though. Can't bolt the bigger R32/R33 4.11 crown wheel into the R34 smaller front diff housing in the sump.

Who cares though, late 32/33/34 is all the same block / bottom end as Duncan mentioned.

34 head casting is the same as the rest but the exhaust camshaft is different on cas drive, requiring the later cas. That said the 34 cas can be modified to fit the 32/33 cams, so you still wouldn't know what's up without pulling stuff apart.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...