Jump to content
SAU Community

Recommended Posts

Brief History, Bought this Shell for the price of a round of drinks! It was stripped ten, fifteen years ago of all its running gear, and I mean everything. Why? It was a breaker. 

Pic shows sitting on drink crates, mocked up using 940 turbo Volvo rims, then Rota 17 inch

Bought all body panels, in a separate deal, spec2 I believe. 

DSC_0009.JPG

DSC_0079.JPG.a42e93c8bf7e1b2a1a16317410c906ca.JPG

Edited by maddy400r33
Pic
Link to comment
https://www.sau.com.au/forums/topic/481187-r33-shell-rebuild/
Share on other sites

Shell was glass blasted and primed and undercoated this week, nothing held back, there was no repairs done on the shell previously, as with blasting, it's back to bare metal. Turrets are original and very clean. Overall for a 25 Yr old car, it's pretty solid. 

 

DSC_0143.JPG

DSC_0140.JPG

DSC_0142.JPG

DSC_0141.JPG

Edited by maddy400r33
  • Like 5

Tnks, and thanks! 

It's cheap as chips, everything I bought with it or for it was, that's the way it gonna be, but everything will be done right, no corners cut here, if budget slows me.... So be it. 

Learning a lot, and hopefully will learn a lot from you yourselves along the way. 

I'm no stranger to car restorations! Normally work on 40 Yr old yokes, so this should be a breeze....... Yeh right. 

Atleast starting with a blank shell, I know what I've got, most skylines here are rot boxes, salted roads in winter, mostly wet, and mucky. Not good when most imports where not protected, very little paint on these from new, primer at best. 

Next step is allow paint to fully harden. Then seemsealer, and stonechip underneath.  Learning how to protect front shock terrets from under and above, also boot seems that leak. 

As for a GTR, not my thing, sorry. RWD ONLY, are you joking! In the land of AE86, donuts and drifting.... 

15 hours ago, GTSBoy said:

Not to shit on the OP, but it's a shame to see time, money and resources spent on a 33.

<runs for cover>

Work so far includes, price of 5 glass blasting bags, and 3L of undercoat paint, less than 1 and 1/2 fills juice! 

  • Like 3
  • 1 month later...

Work is slowing but progressing, garage isn't inviting! Cold, 0°C, dark, and wet, but it is progressing. Making a few repair sections, seen a complete boot floor panel on ebay locally, (UK) at £600, got the part number of the sticker, and searched online. 

content://com.android.chrome.FileProvider/images/screenshot/16044367039561188999673.png

Any one use them? 

https://www.nengun.com/oem/nissan/74514-24u30

Progressed and made the boot floor section, by hand, as I had a few where the glass blasting exposed, it really doesn't take any prisoners. 

I'm moving on to a section in front of the rear wheels, it's a box section shape, and would be in front of the rear subframe. It may be the rear jacking point. 

Can anyone identify it in the image?

 

 

 

  • 2 months later...

Next up is chassis leg. Removed spot welds. Removed chassis section. Heated, straightened, new 3mm plate section cut, weld through zinc primer, and fill holes drilled, ready to be fill welded! 

Should outlast me! One more side to go. 

DSC_0223.JPG

DSC_0222.JPG

DSC_0221.JPG

  • Like 1
  • 2 weeks later...

Wow, great work. Really appreciate when people do their own mods and rebuilds. Hope progress is continuing at a good pace. Can never have enough photos. I did my rebuild the easy way, keep it in the garage and don't drive it much. I happen to love the 33's. Mine is mint but would like to stitch weld and brace the chassis after 25 years. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...