Jump to content
SAU Community

Recommended Posts

On 6/30/2022 at 7:41 PM, GTSBoy said:

Why are you hesitant? Have you heard the bad things about their clutches?

'Twere me, I'd just do what I actually did do, which is buy a suitable upgrade clutch from ACS/Xtreme. There are other Ozzie options too.

Hesitant because of the price (its very well priced). I haven't heard anything bad about them, but I just wanted to ask you all since it was recommended here and you've had these cars around way longer.

I have seen ACS/Xtreme and that was another company I was leaning towards. Their price is about what I've seen other clutches priced at. 

On 01/07/2022 at 9:32 AM, Jjtxaz24 said:

What's the price with shipping to 40121?

I dunno, make me an offer I can't refuse. It's this one for $850 from Golebys, they use Exedy covers and pressure plate.

https://www.golebysparts.com.au/collections/npc-performance-clutches/products/rb20-rb25-rb26-npc-heavy-duty-button-push-style-clutch-kit

Edit hang on, are you in the US ? Thought it was a Brisbane postcode, but now that looks like Fort Knox. I can still do it but a clutch to the US will be about $100 - $150. I'll send you a PM

Mantic are totally legit, they are a performance sub brand of one of the big Australian manufacturers (clutch industries perhaps? I can't remember). I've also found them good for questions if you have any

Why pay GTR tax if you don't need to? 

On 7/4/2022 at 10:47 PM, Duncan said:

Mantic are totally legit, they are a performance sub brand of one of the big Australian manufacturers (clutch industries perhaps? I can't remember). I've also found them good for questions if you have any

Why pay GTR tax if you don't need to? 

Awesome. Thank you Duncan. I'll be ordering from them. They got some good prices. 

Edit: Went ahead and ordered their stage 2, gonna need the rest of the "while I'm in there parts" free shipping so thats a plus. 

Edited by Jjtxaz24
  • 1 year later...
On 25/11/2020 at 10:53 AM, BK said:

Ok, by now everyone knows I am an avid ATS advocate and consider them to be the absolute best clutch on the market bar none. So at that power level, if you had say an ATS spec 1 carbon triple rated at 1400hp you would likely never need to replace the clutch again - ever. I have them in both my 32 and 33 and the way they are progressive is on another level compared to any ceramic or metallic based clutch. Only downside is price, they are off their head expensive now at around $5k, but you do get what you pay for.

If budget is a concern at around the $2.5k mark Xtreme now make their own carbon twin, and is probably what I would get if an ATS is too much of a stretch.

Have U ever tried the uniclutch I have heard great things about them and was wondering if anyone had personal experience with them on a 650+awhp car

20 hours ago, [SKYHI] said:

Have U ever tried the uniclutch I have heard great things about them and was wondering if anyone had personal experience with them on a 650+awhp car

I don’t think they’re rated to hold that power 

I was looking into the uniclutch, as something that doesn't rattle, dampens and holds horsepower is the dream.

 

They didn't seem super confident on the power holding though.  Could just be covering themselves, which is understandable.

 

"The 10in sport Uniclutch can handle a peak of 1100Nm at the flywheel, not sure how that translates to HP.

As for the power output of your engine, I would suggest holding for the UniClutch Track, I feel the 1000HP will have a higher torque rating then what the Sport will be able to handle, We have fitted prototype track clutches to a number of street/track test vehicles now and have found pedal effort to be reasonable. It is very similar to OE pedal feel. and would fall within the torque capacity of the Uniclutch Track."

 

The track clutch loses the dampening and rattles(?) I believe though.... don't quote me :)

  • 1 month later...

I’ve just installed a Uniclutch sport into my R32. I’ve been blown away by it… it drives like a stock Toyota Corolla. It doesn’t make sense to me that a performance clutch can drive this well.

I was about to pull the trigger on a Nismo Coppermix twin plate when I discovered the Uniclutch and decided to give that a shot instead. They’ve changed the game and I couldn’t be happier. 
 

I was previously using an Extreme cushioned button clutch with lightened flywheel. I’m still using the same lightened flywheel with the Uniclutch.

Edited by Ryno
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...