Jump to content
SAU Community

Recommended Posts

I’ve done a search but haven’t been able to find anything. Is there anyone on here who understands turbos who would be able to explain the difference in how these turbos would behave / respond compared to one another. 
obviously housings can affect this so let’s compare 

1. 6870 gen 2, 1.0ar T4 divided rear 

2. 6875 gen 2, .96ar T4 rear 

now I know the 6875 is rated a little higher, will it actually make more power and how much will you sacrifice in lag? 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/
Share on other sites

1 hour ago, r32-25t said:

Wouldn’t the compressor maps be the same for the fact they’re the same compressor wheel and housing 

Not sure, on their website says the 68/75 is a more modern design turbine

 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944123
Share on other sites

53 minutes ago, SiR_RB said:

68mm comp wheel will max out well before the 75 rear 

 

So there would be no reason to go 6875 over 6870? 
this is what I’m trying to find out, I’d like to actually talk to someone who is really switched on with turbos and not tied to any one brand. When I sell my motor I’ll probably let it go with the entire hot side. As my new motor is a 2.7, I’d like a turbo that is responsive, but can still make decent power and give a decent push when turned up. 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944315
Share on other sites

Why not the 6466 then ? I tossed up going the 6870, then I thought why ? People are making 500 - 600rwkw with them and it will always be more responsive than the 6870, so I went the 1.00a/r 6466.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944320
Share on other sites

As Bk said, seriously consider the 6466

 

if you have a full house head and a decent rear (1.00+ in size) I have seen the 6466 push 580ish kw and would be an absolute rocket on the street with amazing response with the 2.7

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944326
Share on other sites

4 hours ago, BK said:

Why not the 6466 then ? I tossed up going the 6870, then I thought why ? People are making 500 - 600rwkw with them and it will always be more responsive than the 6870, so I went the 1.00a/r 6466.

This is what I’m thinking, but I’m also not a Precesion fan boy, so I’d like to know all my options, I’ve heard good things about the Garrett 3584rs, mixed reviews on the new G series, good things about Borg Warner, I’ve also looked at Xona rotor? 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944327
Share on other sites

4 hours ago, SiR_RB said:

As Bk said, seriously consider the 6466

 

if you have a full house head and a decent rear (1.00+ in size) I have seen the 6466 push 580ish kw and would be an absolute rocket on the street with amazing response with the 2.7

Did 146mph on the 580kw blue line dyno graph

 

have not been back since the tweaking of exhaust setup, also going a CNC Shimless head at the moment and redoing the pipework etc.

 

Keen too see how far we can push the 6466

 

dyno.thumb.jpg.9ff39030b8dd4f21abf51a2759c27089.jpg

 

 

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944332
Share on other sites

26 minutes ago, hattori hanzo said:

Did 146mph on the 580kw blue line dyno graph

 

have not been back since the tweaking of exhaust setup, also going a CNC Shimless head at the moment and redoing the pipework etc.

 

Keen too see how far we can push the 6466

 

dyno.thumb.jpg.9ff39030b8dd4f21abf51a2759c27089.jpg

 

 

What size engine is that on?

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944333
Share on other sites

5 hours ago, Old man 32 GTR said:

This is what I’m thinking, but I’m also not a Precesion fan boy, so I’d like to know all my options, I’ve heard good things about the Garrett 3584rs, mixed reviews on the new G series, good things about Borg Warner, I’ve also looked at Xona rotor? 

My problem with the new Garrett turbos is there’s currently no twin scroll option

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944334
Share on other sites

15 hours ago, SiR_RB said:

What rear is on the 64 mate 

it was .84 with the 146mph

Have since gone 1.15 but did not get any massive changes, have since gone to 4" dump and CNC head to assist unlocking a few more ponies.

goal is 150mph on a 6466

 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944360
Share on other sites

6 hours ago, hattori hanzo said:

it was .84 with the 146mph

Have since gone 1.15 but did not get any massive changes, have since gone to 4" dump and CNC head to assist unlocking a few more ponies.

goal is 150mph on a 6466

 

What gearbox?

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944366
Share on other sites

9 hours ago, hattori hanzo said:

it was .84 with the 146mph

Have since gone 1.15 but did not get any massive changes, have since gone to 4" dump and CNC head to assist unlocking a few more ponies.

goal is 150mph on a 6466

 

What boost was that at mate?

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944368
Share on other sites

Had a chat with the guy from Garrett turbos yesterday about turbo options, he recommended the G30 900hp or G35 900, said they would offer good response and solid top end, another option is the G35 1050hp, this turbo is to supersede the 3584rs and will be released in a T4 divided rear housing option in the 1st quarter of 2021. 

Link to comment
https://www.sau.com.au/forums/topic/481617-6870-vs-6875/#findComment-7944382
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...