Jump to content
SAU Community

Recommended Posts

Hi sorry if someone has asked this before..I had a search :(

 

Just wanted to know if front brembo r34 gtr calipers direct fit onto gtt rotors with no issues..

My r34 came with front gold brembos and looking to change the worn down slotted rotors that it came with though im not sure if they are gtt rotors or a little larger or thicker?..thanx 

Link to comment
https://www.sau.com.au/forums/topic/481664-r34-gtr-brembos-on-gtt-rotors/
Share on other sites

Thanks I better do that..was seeing if anyone knew before i jacked it up..  was thinking it must be thicker then a gtt rotor...  though does a larger rotor fit?..  it would only be the thickness difference? Not a height or width difference?..   when I spin the wheel it sounds like the rotor makes a small grind sound when I try spin it..is this normal? Or shouldit free spin with no small grind sound?   ..sux when you get a car and not sure what someone has done or if it's riggt 

No. GT-T rotors are only 310mm diameter. GTR Brembo rotors are 324mm diameter. You cannot put a GTR Brembo on a 310mm rotor.

Just repetition for repetition's sake.

 

But.....GTR Brembo rotors aren't thicker. They're all 30mm. Only the 296mm GTR rotors are 32mm. Right?

1 minute ago, GTSBoy said:

But.....GTR Brembo rotors aren't thicker. They're all 30mm. Only the 296mm GTR rotors are 32mm. Right?

Correct for the R32 GT-R (non V-Spec, Sumitomo calipers) but some just throw on R33 GTS-t rotors as they're a bee's dick cheaper.

 

Haha Oh son of rajab . Its like that haha..I checked the pads and they are gtr bolt line up so few they are brembo gtr....I think i must be thicker as i measured and def past 310mm... came to past 320mm so must be 324mm..sorry to ask is the gtr r34 rotor different I size? Or is it just the thickness..should be right to get gtr r34 rotor it sounds? .thanx so much to all

Are you sure they are R34 GTR calipers? It is very common to install Z33 front Brembo calipers but the rears don't fit.

If you have front a rear Brembos then they would most likely be R34  GTR ones. And the rotors are different between 

BNR34 and Z33.

R32-R34 GTR 324mm rotors are all the same

The Z33 324mm rotors have a different hat height.

You'll need to measure this to work out what you have. Google how to measure rotor hat height and follow instructions.

 

 

 

 

  • Thanks 1

Ahh I'll look...they are the nice gold brembo that the had did z33 have gold?...crZy so z33 calpiers bolt dorr direct into the front if a r34? The bolt pattern to take them on and off...  thanks all I'll measure the height and all and see what size... they seem to take r34 gtr pads though looked up and z33 seems to have the same front pad.. so may be z33 brembos..

Thanx for the help guys..didn't want to buy the wrong one and have my wheels on And of alot..

1 hour ago, seriesII said:

z33 have gold?

Yes, here's a guide I wrote back then when I cared about sharing knowledge lol

http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

  • Like 1
  • Thanks 1
On 18/12/2020 at 3:18 PM, Dose Pipe Sutututu said:

Yes, here's a guide I wrote back then when I cared about sharing knowledge lol

http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

oh wow they do bolt into the same place and just a rotar change.. thank you for that.. seems it could be either brembo.. measure it is it seems. So I'll do that soon. Thanks to all who helped and cleared this up for me.. lol @ when I cared about sharing knowledge 🤣🤣 ..so gets like that 

My dust pan is still on my fronts and has the lip sitll..does this mean mine are r34 brembos and gtr rotors? As my dust pan is not hiting my rotor and has the lip..?..  in this guide for z33 calpiers you need to trim the dust pan lip or remove it for z33 rotors 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...