Jump to content
SAU Community

Recommended Posts

I get wanting to keep the rb if you can, and I don't have any experience with how(if?) rb25de can make 220hp n/a. I assume it is possible with the right intake, exhaust and cams but of course pretty much no-one needs to get power out of these without a turbo so there won't be much experience around. the 25DE NEO head is the best of the range for breathing so it can support the flow you are looking for easily

On the other hand, it can absolutely be reliable at that power level, they are designed for at least 50% more power in stock form so everything will is safely oversized like rods, bearings, oil flow etc etc. For oil pump I would still use a large aftermarket one like nitto on an extended crank collar for safety, and you will still need a large oversize sump.

Depending on freedoms, you could look into the premade (or custom) adaptors to fit the 6 throttle bodies and plenum from rb26 to the 25 head which might help with throttle response unless the plenum is too large for 220hp

Clearly downsides are it is heavy and long compared to more modern alloy v6 or I4 which is not good for corner weights, and no doubt those annoying k-series motors are more readily available there

  • Like 1
  • 4 months later...

Well. This is quite a bit overdue for an update lol.. 

Recently been finishing up my engineering degree and working out new jobs.. taking most of my time. In some free time I've been working with that race team with the e46 (shown in my first post in this thread). In my spare time I've been picking away at the r32.. Car is still with me and is now getting a vq35hr (let me explain before incoming hate). Very robust engine especially at stock power levels, parts available everywhere here over in the U.S/Canada unlike an rb, lighter, center of mass further back and lower, less complexities compared to a turbo engine, etc etc. The power levels this engine puts out are exactly where I need to be classing wise with weight/power ratios. I've completely stripped the chassis harness and have been building a nice (dtm connectors, tefzel wire, dr-25,etc) chassis harness for the simples. I'm going to be using a stock 350z ecu/ecm paired with an aim dash for now until the rest of the car is sorted. Have got the engine in the bay and pretty much mounted up with some brackets we have made. Lots of things on order (cooling, driveshaft, diff, etc etc). It's coming along pretty well so far, not sure how many vq r32's exist in the world. Got the inspiration from a local racer with a vq37vhr in an s14 who wins lots of races.

 

 

IMG_2575.JPEG

  • Like 1
On 3/3/2022 at 11:36 AM, smart_garrett said:

not sure how many vq r32's exist in the world

There's more than a few here in Oz with VQ30DET. Many in WA, as there was a shop over here that specialised in the swap. The Skid Factory (Youtube) have a series on an R32 with one in it.

Using the stock ECU might be a recipe for tears. Be prepared for it to fight you. You might be far better off jumping straight to an aftermarket ECU.

On 3/3/2022 at 12:16 AM, GTSBoy said:

There's more than a few here in Oz with VQ30DET. Many in WA, as there was a shop over here that specialised in the swap. The Skid Factory (Youtube) have a series on an R32 with one in it.

Using the stock ECU might be a recipe for tears. Be prepared for it to fight you. You might be far better off jumping straight to an aftermarket ECU.

I was looking at that as I will be fighting some canbus protocol, but from talking to some others I think I will be able to work it out. If I can’t get this to work I’m starting with Bosch here in a couple months and hoping for some serious company discounts possibly on ecm items where I will be working, if not I’ll probably go with an ecumasters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...