Jump to content
SAU Community

Recommended Posts

A few months ago I purchased an R33 rolling shell and have been working on restoring it. After some bodywork and checks, I've been able to identify it as a 1994 Nissan Skyline R33 GTS-25T Type M, and found out it was imported into Australia back in 2005 by a previous owner. I found the dashboard and gauge cluster were Nismo, and just assumed the previous owner had put them in for some reason. However, I recently discovered that they had made GTS-25T Type Ms in Nismo spec, something I hadn't known before. I want to verify, so does anyone know of any other indenfiers or defining features that can confirm whether or not its a Nismo? Note: No engine, transmission, exhaust, spoiler, or bodykit. All had been removed when I purchased it. 

Link to comment
https://www.sau.com.au/forums/topic/483764-identifying-nismo-gts-25t/
Share on other sites

On 14/06/2022 at 4:32 PM, Duncan said:

I am reasonably sure there was no "nismo" r33 gtst, what information did you have on such a beast? If you check your vin in FAST it might tell you if there is something special

I'd found these while doing research on the gauge cluster 

images (1).jpeg

116652764_10158910177877112_761590868198701898_n.jpg

As others have mentioned it's most likely the Nismo package option.

I do remember many years ago there was a guy on this forum who owned a Nismo optioned gunmetal grey series 1. it was a Nismo pre-production concept car which was set to be a GTS25t equivalent of the 400R. it was pulled from the assembly line and never made it. it was only discovered from official nissan marketing material left in the boot.

On 14/06/2022 at 10:12 PM, dyl33 said:

That nismo wing is filthy.

Well, let's just say it was "period correct". You would have been the coolest person in the carpark under the freeway in 1995

  • Like 2
On 14/06/2022 at 10:23 PM, mlr said:

I new I seen something somewhere 

Build this, call it the long lost number 4

 

 

 

On 15/06/2022 at 6:15 AM, Duncan said:

Well, let's just say it was "period correct". You would have been the coolest person in the carpark under the freeway in 1995

So was this so called 2500R actually a thing ? As in did this car infact come from Omori ?

On 6/14/2022 at 4:41 PM, BK said:

 

So was this so called 2500R actually a thing ? As in did this car infact come from Omori ?

It's maybe plausible in some regards, but the pictures show some pretty obvious modifications that wouldn't have been how Nismo does things. The missing fan shroud is a weird one.

On 15/06/2022 at 9:41 AM, BK said:

So was this so called 2500R actually a thing

yeah, saw it myself in real life. Was in Sydney many years ago, no idea where it went.

 

OP, you can search your VIN in gtr-registry.com and see what comes up. But you will find it's a regular GTS25t with some Nismo aftermarket parts (fairly common).

 

On 15/06/2022 at 11:38 AM, niZmO_Man said:

yeah, saw it myself in real life. Was in Sydney many years ago, no idea where it went.

 

OP, you can search your VIN in gtr-registry.com and see what comes up. But you will find it's a regular GTS25t with some Nismo aftermarket parts (fairly common).

Wow - just read the whole thread on that so called 2500R prototype. I get it is a real car, but it didn't actually go back to Nismo for anything did it ?

What a really, really shit thread to read... so confusing and contradictory on the claims made.

On 15/06/2022 at 1:24 PM, BK said:

Wow - just read the whole thread on that so called 2500R prototype. I get it is a real car, but it didn't actually go back to Nismo for anything did it ?

No idea, very good point. It was a good dream though hehe.

Yeah, seems the whole Nismo thing was just a kit. Not too disappointed, still my dream car either way, and the gauge cluster is sweet. I have fallen in love with the idea of a GTS-25T Type M Nismo though, so I might pursue a Nismo-inspired build! Chassis no. is ECR33-017724 if anyone was curious. 

20220614_171045.jpg

20220614_171047.jpg

4b25b06928432efb25162a9ac44c4146.jpg

  • Like 1
On 15/06/2022 at 5:35 PM, GTSBoy said:

Imagine all that love and attention paid to a car that actually looks good. Like a 32 or a 34?

While I disagree with your implication that the R33 looks bad, perhaps this R34 GTT Nismo kit tickles your fancy? I find the wing particularly beautiful for the car 

RDT_20220615_1814555871650123261301206.jpg

image_5092b26c-d6fe-4c8b-b114-72fbf9edb24e_1024x1024.jpg

10286658_201422520137.jpg

Oh no. That R34 wing is dreadful. Looks like it belongs on a Honda. The whole back of the kit is bad actually. Only the front is OK.

I belong to the "R33s are boats that look like a Maxima aggressively rear ended a Magna" camp. The profile of the car is poor. The length between the back edge of the door and the rear wheel arch is just too long on a 33. The front is bland in a Magnaesque way and the rear is just f**ked up.

The R32 maintains the correct proportions from the cars that created the look (ie, the early Mustangs, and to an extent the earliest Skylines) that sort of survived in the 70s Skylines but definitely was solidly in the design language of the 80s Skylines. The R32s only blemish is really the front end of the bonnet. But that can be changed.

The R34 brought back the correct profile and proportions. It was actually confrontingly square when it first came out, but that soon passed. The only blemish is the slightly incorrect taillights, but they are much better than the very wrong lights on the 33 (and the lower end and Aussie built 31s). Equal sized stoveplate rear lights are a requirement for a proper Skyline.

You have to slap a lot of tupperware onto a 33 to mask all the problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...