Jump to content
SAU Community

Recommended Posts

And the comedy continues. I don't get it. If you are so adamant that you are right with the tuning box, then prove it. Dyno before and after and 1/4 mile time slips. Prove us wrong. We have all been in the car modding community for long enough to know what are gimmicks and whats real. 

  • Like 2
22 hours ago, Aramith said:

joined the v series group on facebook, there's 1250 members and most of ém have v series skylines THAT ARE LITERATE
It's australian. Thikning about swapping my v36 for a mitsubishi GTO.
Just istalled the GTR R-35 style headlights into my 370GT, They're kinda gimmicky but could come up good with powerful globes.
All yall who don't know what an ECu tweek is deserve to be suspended or banned and stop bullying new people with them. You Know Nothing.

 

 

Aramith i have had all the Vs done dyno runs before and after mods. You will be lucky to get 10hp more on a stock V36 with a tune. 

Get yourself some bolt on mods then get a dyno tune. Not a plug in from ebay. 

If it sounds to good to be true.....

  • 5 weeks later...
On 12/08/2022 at 4:02 PM, V35_Paul said:

give the MAF sensors a clean first. I had problems with my V35 when oil from the K&N filter would get on them.

Have them a good clean and left them to dry for a few hours. Thought it had worked, but no. Today is like 28 and there's that rattle again :(

Do I need a scanner to check O2 sensor next? What comes after that, gallery gasket?

On 12/9/2022 at 1:25 PM, awsam said:

Have them a good clean and left them to dry for a few hours. Thought it had worked, but no. Today is like 28 and there's that rattle again :(

Do I need a scanner to check O2 sensor next? What comes after that, gallery gasket?

Did it work for a time?

The K&N filters aren't dripping with oil are they? 

On 13/12/2022 at 8:23 PM, V35_Paul said:

Did it work for a time?

The K&N filters aren't dripping with oil are they? 

No it didn't work at all. The next day it started again. The filters were blown with air after a service about a month ago. Pulled them out the other day, didn't notice any over the top oil. My pinging has been happening for a couple of years. But this year its quite bad. Only ever used 98 since purchasing about 10 years ago.

On 13/12/2022 at 8:23 PM, V35_Paul said:

Did it work for a time?

The K&N filters aren't dripping with oil are they? 

A guy commenting on this video seems overly confident adding slightly more 5/30 oil with LSPI solves it.
Pinging sound at 24sec

 

Edited by awsam
  • 7 months later...

Its an old thread, but I saw something last night that had never happened before on my 2008 370GT Coupe.

I *think* I normally get around 500 kms between each full tank. I dont go to totally empty, but at least till it stops giving an estimate how much is left. I normally do most of my K's around the city, in traffic, and Im not a lead foot. I also see that if you add the KM's travelled (trip meter) plus the estimated range left to empty, its always more than I get.

On monday night, I did a trip from sydney to macarthur, mostly via freeway, back to sydney, and then back to macarthur, and then back to sydney the next day not using the toll road. Long story... and looong drive. Not all is freeway. When I got close to city (around pyrmont) with loooots of late night roadworks along the way, my trip meter said I had done around 300KM and the range indicated I had another 400KM remaining. thats an estimated 700KM on a single tank.

Are others seeing these kind of reading/estimates. Driving through the traffic soon after, it dropped pretty quickly. I made a wrong turn in the changed traffic conditions due to poorly posted construction diversion, and had a wasted tight loop through backstreets to get back on track.

Yea in the V36 my milage varies depending on where I go. The usual commute to and from work it gets to 12-13L/100km, but if I do a long drive to rural areas, consumption drops to 9.5-10L/100km

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...