Jump to content
SAU Community

Recommended Posts

More or less decided that I need to have an R32 in my life. In the process of finding and importing yet another R32... but in the meantime I figured it'd be good to take stock of all the R32 and Skyline stuff i've got littered around my house and my parents garage from when I first started playing with 32's back in 2001.

First visit to my folk's garage saw me find these nuggets:

IMG_0599Large.thumb.jpeg.16b12de1a8e0fa59b28464f67a75ddd0.jpeg
Do-luck floor brace, spare R32 dash that I was going to reupholster at some point

IMG_0600Large.thumb.jpeg.e217ded7dcaa0e97106319efba0efe71.jpeg

tucked in behind it a couple of R32 GTR front quarter panels from a previous GTR and a JUN fibreglass front bumper

IMG_0603Large.thumb.jpeg.47cea223a079996de50f912910562a61.jpeg

couple of pov spec headlights and there's a box somewhere next to it that would have the N1 GTR brackets to turn them into the elusive "N1 headlights"

IMG_0602Large.thumb.jpeg.e85770b88829c6afd5d3fb1bd0e1b4e1.jpeg

factory light up LCD panel (yup - not LED... LCD), fibreglass knockoff Nismo bonnet lip and JUN grille

  • Like 3
  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/
Share on other sites

On 29/4/2023 at 1:25 PM, MBS206 said:

This thread feels like a very slow way to claim to be a millionaire these days :P

 

What sort of R32 are you in the process of importing?

Lol at the rates these parts are selling for I might have a million sitting in storage.

looking specifically for an R32 GTS-4. The poor man’s GTR. I kinda have a soft spot for them and I don’t feel bad modding them. Plus they’re about 1/4th the price of a GTR of the same vintage and kms, but go 80% as fast. There’s heaps of aftermarket GTR bits that bolt on including drop in engine swaps if I decide to go for big power.

Altho Andrew probably won’t let me into GTR Festival with one lol

  • Like 1
  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978864
Share on other sites

On 02/05/2023 at 3:20 PM, GTSBoy said:

Does it have the lid also? The lid on these is shorter than the lid on the normal lower armrest.

Good point. From memory 10 years ago I took it apart to repair the loop on the second cup slot, now it's somewhere in the shelving, gotta hunt for it! :D

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978910
Share on other sites

They're miserable things at this age. The top hinge on mine broke and I made a replacement that then broke a few years later and I haven't gotten back to fix it again. And the vinyl on top is cracked like the elbow point on the armrests does and now I have to open a vein and talk to a motor trimmer!

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978913
Share on other sites

On 02/05/2023 at 4:24 PM, GTSBoy said:

They're miserable things at this age. The top hinge on mine broke and I made a replacement that then broke a few years later and I haven't gotten back to fix it again. And the vinyl on top is cracked like the elbow point on the armrests does and now I have to open a vein and talk to a motor trimmer!

I'm hopeful things are better this time a decade later cos I now have a 3d printer and can make my own fiddly parts including changing up the material so it isn't as weak or brittle.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978916
Share on other sites

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978917
Share on other sites

1 hour ago, GTSBoy said:

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

You should see the compliant mechanisms / moving parts the mechanical engineers are printing these days!

Not to mention, you could just print it as a real hinge with a pin in it...

 

Also, Donut Media did an interesting video on repairing an S model Nissan dash, one of the ways they did it was using flocking. Could work for the centre console and be cheaper than a trimmer if cost is a factor...

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978921
Share on other sites

On 2/5/2023 at 7:07 PM, MBS206 said:

Also, Donut Media did an interesting video on repairing an S model Nissan dash, one of the ways they did it was using flocking. Could work for the centre console and be cheaper than a trimmer if cost is a factor...

Not a fan of flocking personally, done it before on race only cars but I’m going for a M Spec vibe for the interior of the 32 eventually.

First step is to acquire car and enjoy driving it. Funnily enough my wife has never known me to own a Skyline - she’s only heard my tales of yearning. She’s only ever known me to own Euros so I kinda want to introduce her to that part of my life.

My old man used to run around in a turbo Ceffy about 10 years ago, and he just passed away last year… so there’s a sentimental connection with an RB there too.

Currently negotiating on a car that has an immaculate dash with no bubble… so we’ll see how that pans out.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978923
Share on other sites

On 2/5/2023 at 6:03 PM, GTSBoy said:

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

Happily. Did you want the top hinge or the bottom hinge

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978924
Share on other sites

3 hours ago, funkymonkey said:

Not a fan of flocking personally

4 hours ago, MBS206 said:

Could work for the centre console

I think Matt was talking to me.

It's not that money is an issue. It's just that once you pick off one scab, you have to pick them all off, and you end up doing the door trims, and then something else (say, the dash, even though it is almost perfect it is 30 years old and does not look new any more) starts to look scaly and down the rabbit hole we go.

Plus, flocking is not a hard wearing surface, so it's not gunna last long on an armrest. Needs to be leather/pleather. I have alcantara(ish) seats now, so I need to step my game up if I'm going to trim anything.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978930
Share on other sites

18 hours ago, GTSBoy said:

I think Matt was talking to me.

It's not that money is an issue. It's just that once you pick off one scab, you have to pick them all off, and you end up doing the door trims, and then something else (say, the dash, even though it is almost perfect it is 30 years old and does not look new any more) starts to look scaly and down the rabbit hole we go.

Plus, flocking is not a hard wearing surface, so it's not gunna last long on an armrest. Needs to be leather/pleather. I have alcantara(ish) seats now, so I need to step my game up if I'm going to trim anything.

Materials Eng really isn't my strong suit (control, and software is), but, if you knew of a suitable low melting point material (I'll check specs later, but believe it is sub 400c we'd need) that can be easily be bought as raw pellets, and someone feels like 3D scanning and drawing up a 3D model of said smaller part (console lid etc), I do have a plastic injection machine at my disposal, just need the 3D model of said part so I can get suitable mould tested...

Could do a hard plastic for main part of lid, and then a softer material as a second injection onto it...

 

Not sure if such a material exists that can be injection moulded that way, there has to be some way that the big manufacturers are automating those items for production...

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978949
Share on other sites

On 3/5/2023 at 6:26 PM, The Bogan said:

How is the potential rust?

Little rust on the battery tray. Other than that it’s clean. From a non snowy region so I’m a bit reassured

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978953
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...