Jump to content
SAU Community

Recommended Posts

Hi all,

I hope this isn't frowned upon, but I am looking at upgrading brakes on my S15 mainly for the looks. I will obviously take whatever performance gains come with the upgrade as a bonus.

What I think looks good is large diameter rotors (around 350mm front and at least 330mm rear) and large calipers.

What do people think are the best option out there value for money wise?

Options I'm currently considering:

  • Attkd from Just Jap - Will cost about $5700 for everything
  • Evo Brembo's - Will cost maybe around $4500 depending on the caliper cost and condition

Others options are Akebono's with the kit from Concept Z Performance in the USA or CTS-V calipers (don't know much about this option and not sure if there is a kit for the rears).

Link to comment
https://www.sau.com.au/forums/topic/484717-best-brake-upgrade-for-looks/
Share on other sites

14 minutes ago, GTSBoy said:

Full brake delete. You'll get many more admiring looks from doing that than any other upgrade.

Hi. Thanks for the helpful comment! Not sure if I should bother...... but:

  1. I'm doing it because I like the look, not to impress anyone else.
  2. Wouldn't a brake delete be the opposite of what I'm after? Maybe try harder?
23 minutes ago, waggat said:

Hi all,

I hope this isn't frowned upon, but I am looking at upgrading brakes on my S15 mainly for the looks. I will obviously take whatever performance gains come with the upgrade as a bonus.

What I think looks good is large diameter rotors (around 350mm front and at least 330mm rear) and large calipers.

What do people think are the best option out there value for money wise?

Options I'm currently considering:

  • Attkd from Just Jap - Will cost about $5700 for everything
  • Evo Brembo's - Will cost maybe around $4500 depending on the caliper cost and condition

Others options are Akebono's with the kit from Concept Z Performance in the USA or CTS-V calipers (don't know much about this option and not sure if there is a kit for the rears).

Yeah I don't recommend doing this unless you need more thermal capacity. If your heart is set on doing this anyways I don't recommend random unknown brands for this stuff. Akebono or Brembo is fine though. Alpha Omega racing seems to like the Falcon FPV Brembos or Evo Brembos as you already mentioned. The fact that they're thinking about issues like pad knockback, suspension knuckle rigidity, brake bias, dust shield/piston dust boot retention, etc... is a good sign IMO.

I understand that by looks you just mean larger and new looking, so just grab whatever you can find cheapest in 350mm, any half credible brand will be adequate stopping wise. If you go the evo brembos you probably have to consider the cost of having them stripped, powder coated, rebuilt, re-stickered.

Personally I'd stay away from any home made kits as you won't know the quality of the caliper adapters which could be dangerous

  • Thanks 1

R35 GTR brakes with carbon ceramic rotors look the best for sure. 

https://www.alphaomegaracing.com/product/r35-gt-r-brembo-adapters/

https://www.amsperformance.com/product/alpha-performance-r35-gt-r-carbon-ceramic-brake-package/

Some say you can't put a price on looks. Others say that you can and it's about $35,000. But think of the value because really, the looks are priceless. 

  • Like 2
4 minutes ago, Murray_Calavera said:

R35 GTR brakes with carbon ceramic rotors look the best for sure. 

https://www.alphaomegaracing.com/product/r35-gt-r-brembo-adapters/

https://www.amsperformance.com/product/alpha-performance-r35-gt-r-carbon-ceramic-brake-package/

Some say you can't put a price on looks. Others say that you can and it's about $35,000. But think of the value because really, the looks are priceless. 

Saw someone on FB Marketplace post full kits for ~10k. Not sure if I consider that the best value for money compared to the Attkd kits for $5700.

2 minutes ago, waggat said:

Saw someone on FB Marketplace post full kits for ~10k. Not sure if I consider that the best value for money compared to the Attkd kits for $5700.

Sounds like they were just selling their R35 brakes. The big bucks are in the carbon ceramic rotors, those are about $20,000.

When you're going for max looks, gotta have those carbon ceramic brakes. I don't see Attkd selling a carbon ceramic option, so do you really have any other choice then the R35 kit at this point?

1 minute ago, Murray_Calavera said:

Sounds like they were just selling their R35 brakes. The big bucks are in the carbon ceramic rotors, those are about $20,000.

When you're going for max looks, gotta have those carbon ceramic brakes. I don't see Attkd selling a carbon ceramic option, so do you really have any other choice then the R35 kit at this point?

Meh.... Another comedian!!

  • Like 2
2 minutes ago, robbo_rb180 said:

Best value...........

https://www.ebay.com.au/itm/165900019651?hash=item26a06967c3:g:6qEAAOSwSOdjqVhv&amdata=enc%3AAQAIAAAA8C%2BdCsusVox3XxUhK3ZiFvts0Iy55uejoqdGDtbN3KFBlyCJ0Iw4j7sYBjppoq5%2B75RTWHeDLJoGT76cJNyYGgmiwFrHXMJ4M%2Fn4vkA8VO90YnBfBql2IhQnc5wmbNXQrnwFpLm6FLuSsbFC6BnXaSa%2FwVbXEB8hmMs9jk52ycwVMNQ5L%2Fxlc1q0UhKZuAhTalsCpmXv9aCGYDc2UCgnZ8FalU9wP%2FC%2F5Ut4YNQGTxnxahXiQgDixf5U73w8pWGNLnx0t2UJWtrC%2BDJfR7KTivVsocucxrdOwioWSO%2FcHhtSDLqhm6eIPFLDF0Q5VcsccQ%3D%3D|tkp%3ABFBMvOePnY1i


I have a EVO brembo setup and its around $6k with quality rotors, pads and refurb. Will only fit behind certain 17s so recommend 18 inch wheel with big brake clearance faces.

Any brake setup will also require a BMC upgrade, possible new lines, may have ABS issues and a possible hand/park brake relocation.

Hey mate, thanks for the response. Yeah I'm aware of most of those potential issues.

Is there any downside to running bigger brakes when done right? Or is it that people cut corners when it's just for looks and it compromises on a major safety component?

Genuine question as I'm not sure where the hate comes from. Big brakes certainly look amazing.

1 minute ago, soviet_merlin said:

Big brakes certainly look amazing.

This is true. And then you've spent $3k or $5k or $10k or $35k (if you've done it the best way) and you have something that looks good but doesn't actually do anything useful.

I'd rather spend $10k on the suspension. Black arms of course, because I give no f**ks for the looks.

18 minutes ago, GTSBoy said:

This is true. And then you've spent $3k or $5k or $10k or $35k (if you've done it the best way) and you have something that looks good but doesn't actually do anything useful.

I'd rather spend $10k on the suspension. Black arms of course, because I give no f**ks for the looks.

I wonder what wheels you've got...... I assume steelies in your desired diameter, width and offset.... f**k looks hey!!!!

7 minutes ago, waggat said:

I wonder what wheels you've got...... I assume steelies in your desired diameter, width and offset.... f**k looks hey!!!!

No, of course not. Now you are really showing that you don't know what I'm on about. Steel wheels are heavier than the very light RPF1s that I have. Why do I have RPF1s? Because they are very light. Are they the best looking wheel? Hell no. Are they close to the optimum of light & affordable & not ugly. Yes. Yes they are.

Oh. And they are black.

Oh, and so are my calipers.

And the hats on the brakes.

Edited by GTSBoy
2 minutes ago, GTSBoy said:

No, of course not. Now you are really showing that you don't know what I'm on about. Steel wheels are heavier than the very light RPF1s that I have. Why do I have RPF1s? Because they are very light. Are they the best looking wheel? Hell no. Are they close to the optimum of light & affordable & not ugly. Yes. Yes they are.

Ok. So you have your preferences. Why the f**k come into my thread and try and downplay my preferences? Does it hurt your ego that I don't give a f**k about your little performance requirements????

  • Like 1
41 minutes ago, soviet_merlin said:

Is there any downside to running bigger brakes when done right? Or is it that people cut corners when it's just for looks and it compromises on a major safety component?

Genuine question as I'm not sure where the hate comes from. Big brakes certainly look amazing.

No difference in use with "street" pads (ie pads that work from cold). It can be a problem with things like rally use where you might start sub zero but do a 30 min stage flat out so you need to deal with a very wide range of brake temps.

Really the only issue with big brakes on the street is they are expensive to buy, might need larger wheels (also expensive) and discs and pads will be more expensive at replacement time too.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
    • This is how I last did this when I had a master cylinder fail and introduce air. Bleed before first stage, go oh shit through first stage, bleed at end of first stage, go oh shit through second stage, bleed at end of second stage, go oh shit through third stage, bleed at end of third stage, go oh shit through fourth stage, bleed at lunch, go oh shit through fifth stage, bleed at end of fifth stage, go oh shit through sixth stage....you get the idea. It did come good in the end. My Topdon scan tool can bleed the HY51 and V37, but it doesn't have a consult connector and I don't have an R34 to check that on. I think finding a tool in an Australian workshop other than Nissan that can bleed an R34 will be like rocking horse poo. No way will a generic ODB tool do it.
    • Hmm. Perhaps not the same engineers. The OE Nissan engineers did not forsee a future with spacers pushing the tie rod force application further away from the steering arm and creating that torque. The failures are happening since the advent of those things, and some 30 years after they designed the uprights. So latent casting deficiencies, 30+ yrs of wear and tear, + unexpected usage could quite easily = unforeseen failure. Meanwhile, the engineers who are designing the billet CNC or fabricated uprights are also designing, for the same parts makers, the correction tie rod ends. And they are designing and building these with motorsport (or, at the very least, the meth addled antics of drifters) in mind. So I would hope (in fact, I would expect) that their design work included the offset of that steering force. Doesn't mean that it is not totally valid to ask the question of them, before committing $$.
    • The downside of this is when you try to track the car, as soon as you hit ABS you get introduced to a unbled system. I want to avoid this. I do not want to bleed/flush/jack up the car twice just to bleed the f**kin car.
×
×
  • Create New...