Jump to content
SAU Community

Recommended Posts

I'm looking for a direct bolt on turbo upgrade for my 93 R33 GTST.  Anyone have experience with this Greddy T620Z turbo upgrade? I'd like to be able to run about 300hp to the rear wheels without putting too much strain on the turbo. I do daily drive the car.  Pretty stock car with basic bolt ons (exhaust outlet, down pipe, high flow cat and catback exhaust along with intake and FMIC).  I'l probably have a Haltech plug n play on the car before installing the turbo.

https://www.greddy.com/products/turbo-upgrade-ecr33-er34-t620z-rb25-11520057

 

Also, any thought on this much boost on a 30 year old motor with 250,000KMs?  Engine feels/sounds strong for what it's worth.

 

Thanks you in advance!

A couple of things, firstly omg that turbo is expensive! $3,000 USD for dinosaur technology is robbery. You could buy a G series turbo and have a good amount of change instead. 

If you want a good budget option, have a look here - https://hypergearturbos.com/product/rb25dethighflow/

If you are keen to spend more, have look at the modern turbos, Garrett G series, Borgwarner EFR, etc. Have a look at the RB25 dyno results thread for inspiration. 

If you upgrade your turbo to something that will support the 300hp you want and only "probably" have Haltech ECU, your car will only "probably" run. Actually, no it won't run. You are going to need the ECU and injectors at the time you do the turbo upgrade. 

No thoughts on "this much boost" as you didn't say how much boost that actually is. Having said that, plenty of unopened RB25's making even more power then what you are chasing. 

 

  • Like 1

300hp (225kw) is barely outside the standard turbo's range with a bit of extra boost in it (200ish).

If you are going to change the turbo you should aim for 250-300kw (330-400hp) to make the expense worthwhile :)

  • Like 1

Wasn't there some discussion of how the Hypergear high flow actually has different dimensions so it's not a true bolt-on replacement? Honestly if that's the case I would consider just going true twin scroll and go down a massive rabbit hole of getting all that to package as close to stock as possible.

52 minutes ago, joshuaho96 said:

Wasn't there some discussion of how the Hypergear high flow actually has different dimensions so it's not a true bolt-on replacement? Honestly if that's the case I would consider just going true twin scroll and go down a massive rabbit hole of getting all that to package as close to stock as possible.

Yeah - the Hitachi core is huge (long) and the core Tao uses is quite short, so the compressor housing moves backwards.

But I wouldn't let that stop me. In fact, I didn't.

But I imagine that the correct thing to do is to go for the latest G series on an Artec manifold. In V band. And f**k the twin scroll, because short short Artec manifold runners + easy install/removal/adjustment outweigh the small loss in spool.

1 hour ago, GTSBoy said:

Yeah - the Hitachi core is huge (long) and the core Tao uses is quite short, so the compressor housing moves backwards.

But I wouldn't let that stop me. In fact, I didn't.

But I imagine that the correct thing to do is to go for the latest G series on an Artec manifold. In V band. And f**k the twin scroll, because short short Artec manifold runners + easy install/removal/adjustment outweigh the small loss in spool.

Yeah, but twin scroll is the OEM thing and I love pain.

11 hours ago, GTSBoy said:

There's no twin scroll on the OEM turbos. On the manifold, kinda, yes. Not on the turbos.

Rather it's the OEM thing these days. I don't think I see single turbo monoscroll on any I6. Obviously back then twin scroll turbos weren't readily available so I saw a lot of "twin entry" designs which had a divider on the manifold but nothing on the turbo.

45 minutes ago, joshuaho96 said:

which had a divider on the manifold but nothing on the turbo

And that alone was a huge improvement to single merge collector.

Those early "experts", used to grind down the divider for "flow" and lost response.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...