Jump to content
SAU Community

Recommended Posts

I bought an off-the-shelf exhaust for my car late last year and I've had it on and off about 4 times trying to get it to sit right. 

The middle slip-on part does not go all the way on and its causing the rear to be pushed back, protruding a lot. The rear hangers all sit below and to the back rather than just directly below. Also, I've had to add bigger (longer) mounts at the back as the exhaust hits the bumper after a short drive and it heating up. 

What sucks is, the first time I put it on it looked the best, each subsequent time got worse 🤣

This was a cheap exhaust (duh) and the shop has been less than exceptional with support but at the end of the day I do like it and it sounds great so I'd like to keep it but just get it fixed.

Exhaust shops are not that common any more. Anybody know any place on the north of Sydney? I guess I can just check in at a few places near me, most are for 4wd's and lifting though! 😆

I was considering modifying it myself, but the angles scare me.

PXL_20250105_073246351.MP.jpg PXL_20250105_073236357.jpg

Link to comment
https://www.sau.com.au/forums/topic/486039-fixing-exhaust-position/
Share on other sites

12 hours ago, Milkmun said:

Protrusion looks pretty good there.

 

11 hours ago, Kinkstaah said:

Yea - Needs a side shot TBH. Other than that, actually looks pretty good. My OCD would want to see it tuck 'higher' but melty melty is a concern.

Oh really? Maybe I'm being silly. I'll get some more shots. I had it higher but found that it went too high after a drive, I never knew this but exhausts can move around a bit when hot (makes sense, just never knew) and when it was higher it would make nice cooking plastic smells. That said, I could put some heat tape on a'la 90's R33 exhausts :D 

 

1 hour ago, Duncan said:

Not sure how broadly you define Northside :) but Castle Hill Exhaust are still around and could sort it.

Ha, I've spent a lot of my life in castle hill waiting for cars to be done. I think I'd prefer something closer but thanks D. 

I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close.

I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?" 

Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)

  • Like 1

Love your work guys, I think I'll leave it then. I was a bit self conscious about how it looks but you've convinced me its fine. 

@GTSBoy I'll just rip down a chain link fence and cram the pipes into my tips. There's tonnes of room. We can call it BozoEuro. 

Tips look fine to me......but

Boring stuff: Legalities - Vehicle standards notes that exhausts cannot extend to a point where they could cause injury

Scary stuff: Mrs cuts open her shin putting stuff in the boot (ensure you have some bandaids and shiny jewellery handy)

13 minutes ago, The Bogan said:

Tips look fine to me......but

Boring stuff: Legalities - Vehicle standards notes that exhausts cannot extend to a point where they could cause injury

Scary stuff: Mrs cuts open her shin putting stuff in the boot (ensure you have some bandaids and shiny jewellery handy)

Easy solution to both of those. Put a split bit of garden hose on each one. Attractive and practical!

  • Haha 2
28 minutes ago, The Bogan said:

Tips look fine to me......but

Boring stuff: Legalities - Vehicle standards notes that exhausts cannot extend to a point where they could cause injury

Scary stuff: Mrs cuts open her shin putting stuff in the boot (ensure you have some bandaids and shiny jewellery handy)

I once hit my knee on an exhaust on my sisters Suzuki Sierra after she drove it her *normal* way. My knee looked like porridge for weeks.

Bec and my daughters never go near this car. I can see one of my dogs losing an ear though. 🤔

  • Haha 1
On 1/8/2025 at 10:32 AM, PranK said:

I once hit my knee on an exhaust on my sisters Suzuki Sierra after she drove it her *normal* way. My knee looked like porridge for weeks.

Bec and my daughters never go near this car. I can see one of my dogs losing an ear though. 🤔

Wait ! What  ? My knees are NOT supposed to look like porridge ? ? 

Ummmm ! I'd best get to the docs ! 

Maybe there a cream or antibiotics or something! !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...