Jump to content
SAU Community

Recommended Posts

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

R32Big_boy: When I was going to the track I followed one rule and one rule only. Go faster than you went last time doesn't matter if you go 0.01s faster or 10s faster as long as you improve. It is the only comparison that is relevant.

If you look through Motor magazine and see what times Cameron McConville gets out of stock cars (1'48" from stock Evo 6.5 (from memory)) you can see that there is so much speed left to get from the driver before wasting money on the car.

Suspension and brakes are the best upgrade as I look at them both as reliability upgrades. Riding the bump stops around southern loop on the stock suspension is no good for anything.

Did you mean turn 6...? Not much of a drift action was happenning, you were mostly spinning them on a straight line. A lot of smoke though, the girls thought someone blew up. :P

You were too slow anyway, so i took you over. :)

What can I say, I lack traction on street tyres :wassup: Thought I might loose you in a cloud of smoke.
....If you look through Motor magazine and see what times Cameron McConville gets out of stock cars (1'48" from stock Evo 6.5 (from memory)) you can see that there is so much speed left to get from the driver before wasting money on the car......

:werd:

Godamn i am soo enverious of you lot. Hopefully i'm getting brakes and suspension within a month or so. That way troy and i can go at gtst style. Not that i'll stand a chance against any one.

Forget suspension, and for brakes all you need is some good front pads and some good fluid, you are only doing max 5 hard laps, if they start to go away just give them a lap to cool down.

I wasted plenty of money on susp only to go 0.5seconds quicker around Wakefield. Over the next 18months i pulled 6 seconds out of my best lap time without a single mod.

Just get out there and enjoy it. Unless your Scotsman, odds are your car will be far quicker then you the first few times :)

Jarrod - look at Adz. He was running street tyres (mostly), stock suspension and stock brakes. He was doing fine. Yeah sure he wants to improve all of those things eventually but he was still out there giving it a go and learning.

As he can vouch once he chucked on the semi's - you will appreciate the upgrades more if you've had a run with out them for comparison!

Anyways..... whats the next plan boys? We have to get this Sydney sider Duncan out to some real tracks (especially Sandown and Phillip Island so he can actually go fast on a track for a change! haha!)

Forget suspension, and for brakes all you need is some good front pads and some good fluid, you are only doing max 5 hard laps, if they start to go away just give them a lap to cool down.

I wasted plenty of money on susp only to go 0.5seconds quicker around Wakefield. Over the next 18months i pulled 6 seconds out of my best lap time without a single mod.

Just get out there and enjoy it. Unless your Scotsman, odds are your car will be far quicker then you the first few times :)

Roy what brake fluid / pads are good for road / few track days which dont need 1 lap to get warmed up and wont spew brake dust all over ya rims?

Denham,

They say you shouldn't use "street pads" more than once on the track. If you are going for a track pad thats also ok on the streets (like RB74's etc) then the fact is they are dusty.

There's no such thing as a non dusty / non agressive when cold pad thats good on the track.

I'm using the Castrol SRF brake fluid which is awesome - but not cheap.

However - if you want a good read on people opinions on lots of different pads that people use on the track then check out this thread.

http://www.mrtrally.com.au/forums/topic.as...asp?TOPIC_ID=36

Racebarkes recommend RB74 front and Comp 2 rear for the GTS25t. I'm happy with the RB74 front and the rear do very little. I also use Motul DOT 5.1 fluid and had no fade on PI or Sandown. At PI I was out braking a lot of serious track cars on semi comp rubber, but I doubt they were using their capacity.

Word to the wise team. Don't spend a lot of bucks to find this is not your thing. The only people who will be impressed with your mods is yourself. Non trackies have no concept of what you do and the rest of us trackies will have loads of respect for you just for having a go. Just do the safety basics of brake pads and car fluids and get out there, but gently at first. You will sooon establish what is absolutely necessary.

Racebarkes recommend RB74 front and Comp 2 rear for the GTS25t. I'm happy with the RB74 front and the rear do very little. I also use Motul DOT 5.1 fluid and had no fade on PI or Sandown. At PI I was out braking a lot of serious track cars on semi comp rubber, but I doubt they were using their capacity.

 

Word to the wise team. Don't spend a lot of bucks to find this is not your thing. The only people who will be impressed with your mods is yourself. Non trackies have no concept of what you do and the rest of us trackies will have loads of respect for you just for having a go. Just do the safety basics of brake pads and car fluids and get out there, but gently at first. You will sooon establish what is absolutely necessary.

How do you find that brake pad combo during daily driving geoff??

And what price are these roughly??

Really good performance, althought they feel a little wooden afetr an event for a couple of days. I need to bleed again I think as my pedal is dropping a bit far.

They don't grab on application but resond well to increasing pressure and when you really push them hard they REALLY start to work a lot harder. I've had some track pads that you had to really muscle when cold.

Price is around $150 per axle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...