Jump to content
SAU Community

Recommended Posts

I wouldn't know how the speed feels since I only gave it one tiny (and I mean TINY) bit of throttle in 6th gear just after the speed camera near Fyshwick (southbound) and next thing I knew I saw 162 on the instrument cluster. Didn't actually mean to do anything more than say 130 as I overtook someone, it's just it got there way too fking easily!!!

I wasn't so much concerned with my surroundings when I gave it the squirt in 2nd gear - I was more worried the bike was going to take off without me on it any more! bahahaha obviously you're right though, you would get used to it quickly enough.

My mate's had the bike up to 162 in 1st gear, I think it's supposed to hit the limiter at 175 or something from memory.

Also for the record I'm 5'8" and ~83kg heh

Oh also Anthony I'm sure you'll be secretly happy to hear I "dropped" my bike for the first (and hopefully only) time on Sunday, lol. Was completely stationary in that carpark in Tuggers over from the school/library where they're doing construction of some kind. As I put a little bit more weight onto my left foot to roll the bike forward a touch (was too close to gutter to put the stand down lol), I stepped on a small pile of leaves and sticks...which unfortunately gave way :( it was a controlled "drop" whereby I knew I wasn't going to be able to stop it so I just lowered it as slowly as I could....unfortunately it came to rest on the fairing against the curb, so there are very minor scratches on it now...otherwise a tiny bit of a scratch on the end of the clutch lever and that's it.

Earlier that morning I was tossing up removing all the fairings and respraying them myself over the winter break anyway! haha so now I have even more of an excuse to do so.

yeah dude it sucks. The stand on my bike is a spring loaded one. I came out one day and literally watched the wind lean it just enough so the stand kicked back up. Nothing i could do but watch a side mirror snap off -.-

So, as some of you may know, I am in the market for a new motormobile. Getting a "clean" one from ACT is proving hard (got a few I can fall back on), so I did a lazy search for R34 GTST's. From suprise these cars are around $12-20k, my budget was around the 8k mark but a jump to 12-15k doesn't seem that bad if an R34 GTST can be jusified. THe only points I can see is that the R34's are electric and newer, with a better engine. Generally speaking they're more reliable than a R32/R33.

People tend to be bias to their current owned cars, but do people think an R34 GTST for 12-15k would be better than buying a R33/32 for 8k? If I put a bit more cash to the market and get an R34 I might be way better off in the long run. But never driven / know much about them, also they seem to be lower KMs than most 32's/ 33's.

So I guess I am here to sap some knowledge from R34 owners as well as Skyline owners.

All thoughts would be appreaciated.

FUUUUUUUUCK mate that's retarded!!! Why the hell would they make your stand auto-retract on a spring....that's f**king stupid. But yeah I'm just glad it happened in the way it did. Very minor scratching on one of the 'corners' of the fairing which could be easily covered up with touch-up anyway haha

 

So, as some of you may know, I am in the market for a new motormobile. Getting a "clean" one from ACT is proving hard (got a few I can fall back on), so I did a lazy search for R34 GTST's. From suprise these cars are around $12-20k, my budget was around the 8k mark but a jump to 12-15k doesn't seem that bad if an R34 GTST can be jusified. THe only points I can see is that the R34's are electric and newer, with a better engine. Generally speaking they're more reliable than a R32/R33.People tend to be bias to their current owned cars, but do people think an R34 GTST for 12-15k would be better than buying a R33/32 for 8k? If I put a bit more cash to the market and get an R34 I might be way better off in the long run. But never driven / know much about them, also they seem to be lower KMs than most 32's/ 33's.So I guess I am here to sap some knowledge from R34 owners as well as Skyline owners.All thoughts would be appreaciated.

 

If you're going to buy another Skyline, do NOT buy a stock standard one. Buy one with plenty of tasteful and correctly fitted modifications already done. Will save you an absolute f**kload of cash and headache in the long run.

If you insist on going stock, get a clean R33 GT-R.

With a modded Motormobile of any kind it requires Engi Certs which Dickson pits will pick up on and generally speaking more mods = more to fix. My idea was to go for a fairly stock R34 to get it over pits and in the price range of 12-15k for an R34 it's coming stock haha. I think R33 GTR's start around the 15k mark. Already jumping to high. I've gone from 8k to 12-15k. really cannot jump any higher.

 

With a modded Motormobile of any kind it requires Engi Certs which Dickson pits will pick up on and generally speaking more mods = more to fix. My idea was to go for a fairly stock R34 to get it over pits and in the price range of 12-15k for an R34 it's coming stock haha. I think R33 GTR's start around the 15k mark. Already jumping to high. I've gone from 8k to 12-15k. really cannot jump any higher.

 

Yeah sorry lol forgot about that...of all people I should know what that bullshit means haha....if you can find one in ACT that's already modded (and registered) then have a look at that, otherwise good luck to ya :(

  • Like 1

Hey Jeremy, Richard has a nice 34 for sale. Or at least he did have.

I would agree with Troy. If I had my time again I would buy one with at least some good quality base mods, rather than starting from scratch. And there are a lot of bargains around on cars with good mods.

Thanks Eric / Richard, but one of the only requirments that I have stuck too is owning a manual. everything else I'm pretty flexible on. Sorry Richard.

On the side note Richard (You can PM or reply), but have you been generally happy with R34's? Since Dad is the bank, I need to bring a pretty strong business case to get x amount of cash. Trying to get Pros and Cons.

Good luck on the sale :)

Buy Richards and manual convert.

34's tend to have the least problems as the neo 25 is pretty damn reliable (other than coil pack issue, quick fix).

It doesn't really matter what model you buy though, as long as it has been looked after. That said, yes the 34 will have the newest technology out of the lot.

Dad previously owned the 34 I have now, so I knew it was looked after, and I wouldn't change to any other car... except a gtr :)

p.s. r34 gtt, not gtst :yes:

  • Like 1

R34 series 2 (2001) RB25 NEO.

$12k max for a very very good and low km manual (sub 100,000kms) - don't be fooled by owners who think they are worth more.

Anything overly modified is still a money pit.

A good looking set of wheels and lowerd is all they really need.

Future Mods - Stick to exhaust, suspension and Nistune. Aim for between 250 - 300kws.

Plan to drop something like a 3076 on it in the future. A year or two

Most will allready have the coilpacks replaced and 02 sensor will need replacing too

Dont worry about Pod filter - get a K&N panel filter.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...