Jump to content
SAU Community

Recommended Posts

NSW are now allowing P-Platers to drive Turbocharged cars.

Link: http://smh.drive.com.au/motor-news/nsw-backflips-on-pplate-turbo-ban-20130807-2rg9o.html

NSW is set to overturn a ban preventing P-platers from driving the latest turbocharged fuel efficient vehicles.

Provisional drivers in NSW will be subject to fairer vehicle guidelines from next year, with the state government due to adopt a national framework that better reflects vehicle performance.

Under changes to be rolled out as early as January, a contentious blanket ban on turbocharged and supercharged vehicles will be replaced by a formula that calculates the power-to-weight ratio of a car with a limit of 130kW/tonne, opening up a plethora of low-powered vehicles for P-platers that use turbo-chargers to save fuel

Yeah not sure. Each state as their own road laws so it wouldn't suprise me that it's at a state level.I wonder if it is for new cars using that formula or if it'll be for older cars as well.

I wonder if that would include something like an XT Forester. I was driving one on my P's and legally should not have been, but never got a second look by police.

It raises an interesting point though. The XT engine etc. is the same as the WRX's and in some cases bigger displacement and turbo depending on the year of WRX.

I always wonder why driver education is not taught in school prior to being of age for a licence.

In the US they have driver ed in schools, have done for a very long time. It used to include a trip to hospital to visit people seriously injured in car accidents etc. as well as driver training.

I always wonder why driver education is not taught in school prior to being of age for a licence.

In the US they have driver ed in schools, have done for a very long time. It used to include a trip to hospital to visit people seriously injured in car accidents etc. as well as driver training.

I always wondered that too cause I think that'd be an awesome idea.

my school did that.

I always wonder why driver education is not taught in school prior to being of age for a licence.

In the US they have driver ed in schools, have done for a very long time. It used to include a trip to hospital to visit people seriously injured in car accidents etc. as well as driver training.

Without subsidies on offer, these programs are only ever attended by INTELLIGENT members of the driving community - which unfortunately make up such a ridiculously small percentage of the 'problem' drivers, since those drivers are simply complete morons haha

  • Like 1

I always wonder why driver education is not taught in school prior to being of age for a licence.

In the US they have driver ed in schools, have done for a very long time. It used to include a trip to hospital to visit people seriously injured in car accidents etc. as well as driver training.

When i had my first car, id see the bloodstained wrecks at the wreckers as i was getting parts.

Some had bits of skin and hair :sick:

flamin mongrel!!! It certainly idles and revs over 2500rpm but I haven't driven it yet...

and actually no. Despite the fact my bonnet is currently open and has been all day, I've only been fiddling in the boot and mostly the passengers footwell. :) was under Rosie's Bonnet though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...