Jump to content
SAU Community

Recommended Posts

Yeah always had a soft spot since he got one and yeah his is black but hasnt been on the road for over a year... And there is always the itch to hear vtec kick in right behind your ears.....post-100668-13769932567054_thumb.jpg

So am thinking of buying a single piece front/dump pipe. Anyone have experience installing this without a car hoist? I figure its possible just with stands but have a feeling this could be a bitch?

I got a Just Jap Stainless Bellmouth, got it installed as I REALLY didn't want to deal with Snapped Bolts and Studs in the Turbo etc...

It needed a bit of tweaking of the Flange *giggles* to get it to fit. (apparently china pipes are like that)...

Was quoted $120 at Roadway Exhaust in Belco and $150 at Trojan. Trojan won. They replaced all bolts with studs and use Genuine Gaskets.

(not those Crappy silver ones with holes in them)

I have pulled my Frontpipe of before using axle stands etc... It's fiddly under there but as long as everything lines up and nothing breaks. You may be lucky.

  • Like 1

Yeah always had a soft spot since he got one and yeah his is black but hasnt been on the road for over a year... And there is always the itch to hear vtec kick in right behind your ears.....attachicon.gifImageUploadedBySAU Community1376993228.584755.jpg

haha is it parked there cos it won't make it up that driveway?

Yeah seriously some people are f**king RETARDS on that page. Some of them don't even post text with the pictures....it's like cool story bro nice pics, but what in the actual f**k was the point to posting them? Oh, you want to sell something? Well, what? The wheels? The panels? The whole thing? You DON'T want to consider swaps? Here, I'll give you $5. You're offended at my stupid offer?? Well what the f**k did you expect?

/raaaaaaaaaaaage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...