Jump to content
SAU Community

Recommended Posts

Other than the fact it's under finance, that's what I love about the van - ridiculously good on fuel (~1000km from ~57L), can carry heaps of shit and you can sleep in it.

Shame about the expensive part haha

yeah that is frustrating. I can connect the Leaf but neither the Cube nor Cima work, they must be too old for ODB2. PITA

Speaking of the Cima it finally arrived on the weekend, drove it down today (goes great, it's like cruising on a lounge chair).

cima.jpg.

But...there are 2 problems:

* check engine light is on (goes fine though)

* front brakes need machining

Is there a workshop in Canberra who aren't afraid of imports and have a consult 3 or similar tool that can turn the light off, and can machine discs? I'd prefer to get both sorted this week if possible.

Is it just me or do you have your lefts and rights confused. :D

Consult (Grey Plug)

My Bluetooth adapter is OBD and with an adapter cable will plug into my Consult port but won't connect.

It would be worth a phonecall... I've only dealt with National Capital Motors in Belconnen (mostly for Parts) but they do have a service center there too.

I should imagine they would have the appropriate Technology. :)

all sorted now, turns out a lot of the Nissan dealers think they can't do imports :blink:

just got a local guy back home to do the discs and turn the light out at the same time. it was an AFM warning but I am 99% sure it was only because I unplugged it while f**king around with the headlights

BTW is it me or did winter just start again?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...