Jump to content
SAU Community

Recommended Posts

I will need to be taking Rosie throught he pits soon - hopefully next week ! From people who have heard Rosie - do you think the dB is at a legal level?

Rob - Do you have spare stockies / legalz - we can finally do that swap you've been wanting to do !

Apparently aftermarket airflow and intercooler normally gets passed? A mate of mine was telling me when he went through it was fine.

Everything should be legal - I do have UV tinted glass with stickers indicating it is on the glass (Not in the glass) so this may cause an issue as it has been caused an issue for other people - I shall see !

Other then that, I think I am set !

On another note - Rosie could be fully paid off next Thursday which I can start putting money away for 250Killa-Wasps.

Time for everything to be completed with Rosie being ACT Rego'd with 250kW is estiamted at 4weeks. FINGER-ROOS crossed !

I'm running stretched tyres :( The guy said he would put new tyres on the car before I purchased it and when I agreed he put 275's on the back (And I quote "Beucase they look fully sick") which have overly stretched the tyre on the 17" rims.

What size are your rims? You can go up 2 sizes can't you?

Lip to guard distance is the governing factor (assuming you didn't widen the track of your car by a ridiculous amount). For example, TECHNICALLY, the standard R33 GT-R rims needed to be added to my engineer's certificate, even though they're only 17x9" +30 (or +35, can't recall).

Dude. I would honestly take it in with the rims on it. The car will fail for some reason anyway (because its dickson). Just see what they say.

Can only take it to Dickson - so Dickson it is :D

The car will fail for some reason anyway (because its dickson). Just see what they say.

This is likely. It's probably too loud. Mine was 92db. Guessing more like 122db now. :laugh:

Regardless of Tyre Size, How Wide Are Your Rims Jeremy?

Can only take it to Dickson - so Dickson it is :D

I recently put my GTR over the pits with 17x10 and they said its fine if the track width is no more than 10mm out either side. What size and offset wheels have you got?

I can do some calculations if you would like :yes:

I will have to check :D

I'm going to go over the pits as is (already booked) so I got my list - I'd rather them fail me on simple things and get them all done up then spend 1.5hours looking for a fault to fail me on. I just know the rims are not going to pass so preparing.

What i mean is it will fail for something else. So borrow rims you know will pass when you take it in the second time. Just to save you time.

I will have to check :D

I'm going to go over the pits as is (already booked) so I got my list - I'd rather them fail me on simple things and get them all done up then spend 1.5hours looking for a fault to fail me on. I just know the rims are not going to pass so preparing.

Haha it's either Red or White sorry guys

Not going black again because it always looks dirty and I'm over cleaning.

This is why I want to go red

http://www.skylinesaustralia.com/forums/topic/383498-my-bnr34-vspec-uk-model-in-germany/

post-108313-0-47581000-1380896201_thumb.jpg

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...