Jump to content
SAU Community

Recommended Posts

Im thinking then the only annoying bit would be if its got coolant lines, then you have to drain the coolant.

Oh and some of those bolts holding it together would be tricky to access.

I have ratchet spanners and stuff to get to annoying bolts if you need.

i found a good trick is polish it real good, spray with good clear bonding agent paint, then gloss clear over that.

Polished forever.

Blacken that lip. :mrt:

Thinking of lippage for the Wagon too, maybe a Foamy one like Chris's or perhaps something else.

Tried one of the Kebabs from Charnie just now. Jeremy, I now know why you get them. MMMmmm mmmmm... :P

Blacken that lip. :mrt:

Thinking of lippage for the Wagon too, maybe a Foamy one like Chris's or perhaps something else.

Tried one of the Kebabs from Charnie just now. Jeremy, I now know why you get them. MMMmmm mmmmm... :P

yea, they shop up the road sells them! I can barely finish one :/ they are huge

Foam lip? that sounds like a good idea.

Light, soft and able to resist lots of air pressure.

Mint snowfoam lance turned up today, watching the weather so i can do a wash and try it out. Might have a go at polishing and everything.

Also found that Masters hardware Workzone brand pressure washers are the same fitting as Bosch.

The doofus at the hardware counter said " The Bosch rep said not to use other brand products with the pressure washer, we dont have any parts, we just got them for christmas."

The hose fits perfectly, its exactly the same fitting. Thanks to ignoring the idiot staff i got the right hose.

So now i have 11m pressure hose and good accessories.

:santa:

Yarralumla kebabs FTW. By far the best ones I have ever had

Charnwood The land of goat sphincter rings kebabs are pretty insane. It's probably the only thing Charnwood could "claim'. :(

Charnwood The land of goat sphincter rings kebabs are pretty insane. It's probably the only thing Charnwood could "claim'. :(

Yah! as stated, the Kebabs are Very Good. Big, Filling and well worth the price. Might try their Pides too.

Charnie also has : A Very Good Dentist, The Takeaway does Very Nice Pizzas, Burgers, Steak Sambos, Scallops etc... makin' me hungry.

The Chinese is also Tops.

and the Woolies chick that Loves Skylines. :D

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't take it as a guarantee. It's all a game of statistics. And on top of that, smooth over a thick layer of "quality of spanner spinning" as a further Gaussian curve of probability of failure. You play games at anything above ~400 HP, and you're using up margins in terms of engineering and luck.
    • Aye, everything is being touched and all the parts that are responsible for the oiling issues are also fixed. (Crank collar, billet prp oil pump, head return to sump, yada yada yada)  Everything used is of reputable brands like greddy, prp etc. My tuner did mention we’d keep the torque on the “lower” side.   glad to read that my engine won’t blow up on me lmao 
    • It's a fuel pump. EFI, high pressure, but specs otherwise unknown. A bodge job.
    • 800 engine horsies is fine. Will need all the obvious upgrades. Rods, pistons, oil pump, big sump, sump breathing mods. Build for revs because revs are power with less stress on the bottom end compared to boost. Keep the torque down in the midrange, either by limiting boost or timing.  
    • Hiya guys,    i’m currently in the process of getting my rb26 built. everything is being replaced with better/upgraded parts or oem when that’s good enough (which isn’t alot lol). someone earlier mentioned to me that i’ll be screwed cause the iron block can’t take 800hp (to the engine, not wheels) which is what it’s being built for.  what do you guys think about this, am I cooked or na? The guy building the engine will also do the mapping as he is “the guru of old nissan engines” here in Belgium. I know the mapping makes a huge deal so i’m not concerned about that.    I honestly he’s talking shit cause he’s that kinda guy but a second opinion never hurt anyone! cheers in advance! 🫶🏻
×
×
  • Create New...