Jump to content
SAU Community

Recommended Posts

Yeah, for motokhana applications the ability to have a quick stab of zero (or absolute minimum) front torque to bring the back around is a tops idea.

If you look at the Evos when they turn around cones, they almost pivot. I know that some of them have the Motec centre diff controller and they can do similar things.

You would want two buttons. On for Maximum and one for minimum front torque.

oh, and if you need a car to try it one, we have a couple!

BASS OUT

  • 4 weeks later...
  • Replies 317
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

sorry Bass these 3 are spoken for, I can put you in first for the next batch if you want...but at this stage the next batch won't have the mods for min and max torque, the guy that makes them is tight for time atm...so let me know if you would rather wait for the updated version

I need a t/s contoller and have been toying around with the same idea of running a more rwd at first at motohkanas to stop the car bogging down and also to reduce the understeer. Will save slipping the clutch to get going. A bad habit that comes from the 2stroke motorbike days. It would take a little to get used to as you have to correct the wheel to oversteer really quickly when this happens in gtr's.

If you were smart enough it could be plumbed into the steering sensor so when the wheels where close to where the car understeers it would reduce the torque split?

  • 4 weeks later...
Hi Duncan, put me on the list for one od these once they are available again.

Cheers

Yup, same goes for me too please Duncan.

Got any ETA's at this point?

Matt.

"If you were smart enough it could be plumbed into the steering sensor so when the wheels where close to where the car understeers it would reduce the torque split?"

The attesa does that for you, the g sensors going foward and back are more sensitive, the more g force the higher the wattage signal goes to the computer resulting in more fwd. However the g sensors going from left to right reduce the wattage going to the computer as the g reading goes up, ie it becomes less sensitive the harder you corner so the gtr doesn't have the same 4wd characteristics as an evo or wrx/understeer.

This unit doesn't take "control" of the ets as such like the other units available. Its more of an electrical current amplifier? (spelling) to increase the sensitivity and performance of the existing unit, not to outright manipulate it, the higher the setting, the higher the electrical signal making the 4wd more reactive, correct?

Its an amazing idea as the system thats in place is perfect for the car, but not as reactive as I would have hoped for so this mod would be great for fixing the standard system.

With that said, put me down for one. Please pm me with more details if there are any.

Cheers, Nick.

Waiting list:

Bass Junky

R32GTR

R32 TT

ShadowGTR

Anyone else interested please post up I will allocate them in this order....will contact you for payment details when they are ready.

Its more of an electrical current amplifier? (spelling) to increase the sensitivity and performance of the existing unit, not to outright manipulate it, the higher the setting, the higher the electrical signal making the 4wd more reactive, correct?

Yes that is the basic principle, but the output of the controller is not linear like simpler ones, this is controlled/programmed by a chip onboard instead

BTW Mark I have the controller back from Nathan, will drop it by next time I'm in the area

  • 2 weeks later...

Bass Junky

R32GTR

R32 TT

ShadowGTR

IanB

Im in. Contact me for payment details ASAP please.

I was so disappointed in the GTR AWD system when I took it for a hard run over the mountains, not enough FWD at all.

From what I understand, this system doesnt lock it into say a 70/30 split or a 5050 split, it meerly makes the stock system work better, eg, when you corner, it puts more power to the front wheels, what you control is how much more, correct?

Edited by IanB

Hi All, the current list is:

Bass Junky

R32GTR

R32 TT

ShadowGTR

IanB

Gun32GTR

Which leaves only one from the current batch being made......if you want it get on this list quick!

I'll send everyone details once they are ready to go :(

Duncan

I may have to pull out of this :D

After speaking to paul, I have found he makes a unit which is more suited for my needs. More expensive too, but much more customizeable.

Sorry to stuff you around! Im not sure if paul has any in stock, I believe he said he had a couple left, if he does ill grab his, but if not, I will go with this one still.

That being said, if anyone wants to take my place, they can.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...