Jump to content
SAU Community

Recommended Posts

hmm, not many people mentioning continentals.

The tyre shop at my work supplies them, can get them for a pretty decent price too. The manager said they are a damn good tyre, so im going to have to give them a go sometime.

Continental sport contact 2"s.For a big horsepower road gtr these are the the choice.(also AMG and twin turbo Porsche tyre of choice). I have tried various brands and several years ago was advised by Keir Wilson to try the Conti"s.(I crewed for him for the first 2 1/2 years).They are the only tyre he would have on his E55,and his twin turbo porsche and his recomendation for a quick street GTR.A cheaper tyre may feel great on an average vehicle but nearly all i have tried have verged on dangerous on my gtr. My 2 cents worth.

I had Dunlop FM901's on my big heavy v8 commodore, and as I got more comfortable, I was able to throw it hard around tight s-bends around 80km/hr and they didn't complain one bit!

They got replaced by the DZ101s, which a couple of people (me included) have used and been similarly impressed with them.

Too bad Dunlop's getting rid of the DZ101's too, and not replacing them with another series.

Ive heard that Potenza RE01's are a good tire for 3 track days and regular driving included in between.This was on a BA XR8.

Still as they near their end i am told that they are good.

The only complaint that ive heard is that when they loose the outer tread,they loose a bit of their conering ability.

They are arround $460 a pop retail.:P

Edited by Trust33

Im just about to take the plung on some Toyo T1R's, holly sh!t the boss is going to have kittens.

275 x 35 x 18, hold on $520 a corner!

They better be as good as everyone says they are.

Toyo T1R's are great, After 100Km I have to rate them better then my Yoka Aspecs and the piolot sprots I had on the 33. Im very happy.

Toyo T1R

9/10 Dry

9/10 Wet

6/10 Value (They do cost a bit)

Yoka Aspec

7/10 Dry

8/10 Wet

10/10 Value (1/2 the cost of the T1R)

Mich Piolot Sports

8/10 Dry

9/10 Wet

6/10 Value ( Very expensive)

Absolutely the FK451 they are great tyres.

But make sure they actually put the right ones on. Tempe twice quoted me a price for FK451, then fitted the POS 326s. Then claimed I had asked for 326 in the first place and quoted me another, higher, price for 451s :P

Come see us at Unit 1/97 betts rd Smithfield 2164

For all your tyre needs we have all brands and also sell good condition second hand tyres

I believe you need to speak to Blitz if you want to advertise your services here or in other areas of this forum.

Anyone had any experience with Goodyear Revspec RS-02's?

There was a good review on them in the Wheels tyre comparison article early this year, yet it doesn't seem like anyone on here is using them.

I got relatively good price quote for them ($1154 for all 4 corners), but am I better off spending a bit extra to get the Toyo T1R's ($1370 for all 4) as it seems like quite a few people on here rate them...

Tyres will be going on an R33 GTST (front: 235/45/17, rear: 255/40/17) with around 270rwkw.

Can anyone help? :rolleyes:

Absolutely the FK451 they are great tyres.

But make sure they actually put the right ones on.  Tempe twice quoted me a price for FK451, then fitted the POS 326s.  Then claimed I had asked for 326 in the first place and quoted me another, higher, price for 451s :D

I have heard that one before, good ol' tempe tyres :P

Whats a good price or the falken ziex, I was quoted 160 early in the year. This is for 225/50/16.

Or what is a beter tyre in that size under the 200 mark that has good grip and good tyre life.

Well here is my 2yen about that.....

There is absolutely no point in buying a great performance car and then putting crap tyres on them. And the Falken 326 are crap. They are basically among the cheapest tyres that you can get in big low profile sizes so compliers fit them on a lot of freshly imported cars.

The difference between a bad road tyre and a good road tyre is amazing, you really can feel it and you will enjoy your car heaps more with decent tyres.

So.....enough crapping on....I am saying don't spend 250ea on tyres + 1000 on an intercooler, spend 500ea on tyres instead you will love the difference.

Anyone that has been in a car on the track on race tyres will know what I mean about the difference ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...