Jump to content
SAU Community

Recommended Posts

Trust Power Extreme 2, fairly quiet on idle etc but really opens up when you put you foot down and has a nice note. Don't know who would sell them in Perth though, i can only point you in the direction of Advan Performance in Sydney who could ship one to you but i'd say shipping would be worth a bit.

I second the Trust PE2. It's got a great sound when you give it some loud pedal but is very sedate around town. To top it off its pretty easy to get hold of.

I bought mine from Advan as noted above and I'm certain they could ship you one to perth fairly cheaply.

I need something soon.

It cant be to loud, but it has to sound a bit meaty.

about a 3-4 inch outlet and inlet that can connect to my high flow cat.

local in perth would be a bonus but will to ship if it doesnt take long.

any suggestions?

i recommend a custom-made from your local exhaust shop - cheaper than an aftermarket one, exactly to your specifications, and everything about it will be brand new!

Also, the jap made ones hang too low... (defectably low)

I'd sugest something like one of Hi-Tech Mufflers bolt on systems if your worried about noise (legallity) of the system, they generally flow pretty well and are designed to meet the noise, emmissions and ground clearance/exhaust fitting ADR's.

you can check them out here

www.hitechmufflers.com

other that thet, i'd suggest finding a good local exhaust shop and getting one custom made to your requirements

This Trust PEII, at 3.5 inch would it be under 90db (legal?) and does it hang very low?

actually, has anyone got a 3.5 inch that is legal?

ive got a 3.5 inch tipped cannon with 3 inch straight through.... im 100% sure it ISNT legal lol, sounds the part but, thats all that matters to me, lucky where i live cops are idiots when it comes 2 jap imports... " duh a nishan skywhat??? " :whatsthat. hehehe, im screwed when one comes around that know stuff about import cars but lol, till then :)

Trust Power Extreme II's have 3in piping, sit close to the chassis, and come in at about 92dB @ 4800rpm (apparently). They're available at Autobarn for 900ish, or also from SAU trader BT-Revolution here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=75916

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...