Jump to content
SAU Community

Recommended Posts

just reading this other thread about how long people warm up their cars b4 they start driving...

i was wondering how long people leave their turbo timers for?

and also how did u by pass ur immobolizer or u just wait around?

i normally set mine on 15secs after normal driving around and about a minute if i gunned it : abit.

i got the Mongoose 3point alarm imobilizer which work in conjunction with my turbo timer.

Link to comment
https://www.sau.com.au/forums/topic/79152-how-long-u-cool-down-for/
Share on other sites

I look like a fool because i cant lock my car untill the engine shuts off. Im just hanging around my car for 30sec untill it turns off. I would use the Auto feature on my TT if i could lock the car and leave it. Auto normally does around 4 minutes...

15 minute warm up jesus you will be causing more wear on the engine then doing good i reckon. i normally let it warm up for a minute or two then just keep the rev's under 3K and try to keep off boost as much as possible till the oil preasure starts to drop down to the wamr level.

i warm my car up for 15min and leav turbo timer on for 5, neighbours get the shits but hey what can you do. my theory is if they complain smash their windows, if they call the cops get your mates to burn their car.

thats too ridiculous for words

anyway getting back to planet earth

as said before

dont drive hard for the first 5 or the last 5

my tt is always set for 10 seconds

i warm my car up for 15min and leav turbo timer on for 5, neighbours get the shits but hey what can you do. my theory is if they complain smash their windows, if they call the cops get your mates to burn their car.

That's ridiculous.

15 minutes is too long

5 minutes is too long

If they're windows or car was smashed they'd narrow it down to the knob who's car is always running with no-one in it.

15 minute warm up jesus you will be causing more wear on the engine then doing good i reckon. i normally let it warm up for a minute or two then just keep the rev's under 3K and try to keep off boost as much as possible till the oil preasure starts to drop down to the wamr level.

cool down here not warm up...

so most people wait around till their TT turn off before locking the car?

i agree with what others have said in terms of cool down really a turbo timer may not really be required if you just drive normally for the last 5 minutes or so. I have a turbo timer though for the times that i am in a bit of a rush its set to i think 30 - 40 seconds.

Its crazy to be running the car so hot up until you stop that you have to use a turbo timer at all. Its not just your engine, you need to think about brake temps warping rotors etc.

Just drive it slowly for the last 60 sec of your trip, lcok the car and wander off.

The only time a TT should be used is when you have just finished a session on a race track.

My car has done over 100,000km i dont have turbo timer and never let it cool down if ive been driving normally, if ive given it a hit then come to a stop (hardly ever happends) ill give it a couple of minutes. everything still seems to be fine! I agree just take it easy for the last minute or 2 of your drive.

So far just been taking it easy for the first 5 till the car warms up and the oil pressure evens out @ 2kg/cm^2.. than at the end I tend to take it early coming back into my place..

also - what's oil pressure meant to sit on.. i'm guessing about 2kg/cm^2 normal cruising, than when I boost for a bit heads up toward 4kg/cm..

anyways - yeah take it easy for the last couple of minutes.. + get a minute or so while I open the garage door..

tt's are dangerous in my opinion...

what are you guys going to do if someone t-bones your car at high speed, and your sitting there trapped in your car unconscious....hey the ignitions been killed, but the cars still pumping fuel....

I personally dont want to be burnt in my car, so i chose not to use one...same goes if you roll the car and the fuel lines are cut/broken.....pumps fuel out still.....

Just dont drive on full boost for the last couple of minutes of your trip and you won't really need to let it idle down.

If you run an oil cooled only turbo such as a TO4 or something then letting it idle/cool down is more critical.

The standard turbo's and most other modern turbos are watercooled, so excess cool down is simply not required.

My turbo timer hits a maximum of 3:20 using full auto mode and that's travelling long distance sustaining 110km/h+. Usually it will run for around the 1:30mark after some spirited, some normal. Mine's integrated into my alarm so i can lock the car with it running and walk away. No dramas.

tt's are dangerous in my opinion...

what are you guys going to do if someone t-bones your car at high speed, and your sitting there trapped in your car unconscious....hey the ignitions been killed, but the cars still pumping fuel....

I personally dont want to be burnt in my car, so i chose not to use one...same goes if you roll the car and the fuel lines are cut/broken.....pumps fuel out still.....

Thats why you hookup the handbrake sensor circuit.

That way if the handbrake isnt engaged and you turn the car off, the turbo timer doesnt operate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...