Jump to content
SAU Community

Recommended Posts

Hey everyone,

I've just found out my R32 GTR has just cleared customs in Brisbane and will be delivered to the Seaway depot in Adelaide in about a week.

My question is: what's the best way to get the car from the depot to your house? Have people just driven them there (with temp permit etc.)?

I'm worried that the car hasn't been driven for a good 6 months and I'll do damage to it with old fluids in there etc. It's also likely the battery's dead.

If I were to change the oil & filter, and jump start it, would that be safe to drive home? Driven very safely of course.

Otherwise I'll just organise a tow and hope they don't kill my front bumper!

Cheers,

Alan :)

Link to comment
https://www.sau.com.au/forums/topic/79321-picking-up-a-freshly-imported-car/
Share on other sites

couple of things if you are hell bent on driving it home.

1. The battery WILL be dead. no doubt about that. so buy or borrow a jumper pack.

2. there will be next to 0.00 litres of fuel in the tank so you will have to buy or borrow a container of fuel to take with you (98 RON of course). try to get at least a 10 litre container

3. check the brake fluid and brakes. it will have absorbed quite a bit of moisutre over that time sitting still and the rotors will be rusted up quite nicely. the car will not be stopping too well straight off the boat.

4. check the oil. dunno if i'd go to the extent of changing it on the spot, but certainly make sure there is some in it, and that it's topped up.

5. also be aware of problems like stolen steering wheel, stolen gear knob (has happend to me and is a bitch with a a/m gearset that requires a firm hand), stolen boost controller (may be running unlimited boost) etc.

if you have your wits about you it shouldn't be a problem, but all those hassles make you think maybe you are better off just getting a tow...

if your worried about it put it on a trailer

how do you plan to change oil and filter prior to moving it anywhere, you can do it at the depot

when i picked mine up i took spare battery, 20L of bp ultimate (to dilute what little fuel that was in there and would have been off from sitting for 6 months), oil ect. i also checked oil levels, coolant levels, brake fluid levels ect prior to driving off.

couple of things if you are hell bent on driving it home.

1. The battery WILL be dead. no doubt about that. so buy or borrow a jumper pack.

2. there will be next to 0.00 litres of fuel in the tank so you will have to buy or borrow a container of fuel to take with you (98 RON of course). try to get at least a 10 litre container

3. check the brake fluid and brakes. it will have absorbed quite a bit of moisutre over that time sitting still and the rotors will be rusted up quite nicely. the car will not be stopping too well straight off the boat.

4. check the oil. dunno if i'd go to the extent of changing it on the spot, but certainly make sure there is some in it, and that it's topped up.

5. also be aware of problems like stolen steering wheel, stolen gear knob (has happend to me and is a bitch with a a/m gearset that requires a firm hand), stolen boost controller (may be running unlimited boost) etc.

if you have your wits about you it shouldn't be a problem, but all those hassles make you think maybe you are better off just getting a tow...

my battery worked fine and the car had been sitting for 6 months prior to shipping, so it wont DEFINATLY be dead, cos mine wasnt, but your right its very very likely. and your also right about the brakes, they were ****ing awfull on the drive home, still safe enough taking it slowly, but shithouse all the same

I had a quick look of fluids ect- jump started it and put in 10 litres of bp ultimate- brakes locked up for the first few stops but ran sweet after the corosion wore away

Other than that it is not recomended without a permit though this sways few people- It is a very memorable moment driving youre beast off the docks :)

Thanks for your responses guys!

I don't mind getting a tow, but a friend who tried to get his MR-2 towed got refused because the tow truck driver didn't think he could do it without damaging his (stock) front bumper. I just wanted to check if it's relatively safe to drive it back from the docks if that was the only option I had. I certainly would be driving it slowly and safely in order to avoid any damage. It's probably a bit over the top to do an oil & filter change on the spot, so I will most likely check fluid levels etc. make sure everything checks out OK then drive it very sedately home.

I can't wait :(

You wont damage it by putting it on a flatbed. My front bar sits so very low and there were no problems at all. I highly recommend doing that and transporting it to you destination.

If you book a flatbed truck the day before you go down then you are likely to get a better rate too.

my battery worked fine and the car had been sitting for 6 months prior to shipping, so it wont DEFINATLY be dead, cos mine wasnt, but your right its very very likely. and your also right about the brakes, they were ****ing awfull on the drive home, still safe enough taking it slowly, but shithouse all the same

Yeah my car started first go too. But my battery is quite new. On an older car its less and less likely to happen.

I went the tow. For $80 it saved me all the hassles listed above, having to drive an unknown car, and any worries about breaking something.

For peace of mind, it was well worth it IMHO. Compared to the cost of the car its nothing anyway.

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...