Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Absolutely....just add $200 to the prices :mellow:

Gordon Leven in Emu Plains for the Bridgestone and Yoko Tyres

Gary's motorsport tyres in Eastern Creek for Dunlops

give them a call for exact sizes available.

i got the RA1's and i rate them 1billion% awesome tyre but after around roughly 3-4 laps they feel very unsettled. Only time i get wheelspin is a hard 2nd gear shift...then again my car is fairly stock standard..running 235/45-17's all around so i can rotate them..wear is pretty brutal but they've lasted me a good 4 months now haaaard driving at supersprints and still have plenty in them...

Drunken,

I originally tried the A048's and I found them to be a pretty average tyre. Basically after the first couple of heat cycles they got quite oily almost and the rubber stiffened right up which made them very hard to get heat into them.

The only advantage was it meant the tyres lastest longer but they were a good couple of sec's slower around the track than RE55's.

I know a number of the WRX Club guys are using the Toyo's however. But I still think RE55's are the way to go for the ultimate street tyre. Robo - you need to come to the track again dude!

Have to agree on the 048's, the deterioration in their performance is quite noticeable after a few heat cylces. Most of the guys who run in catagories with choices between 032R's and 048R's are sticking to the 032R's. They are far more consistent in their lap times. Particlualry on the front wheel drive cars, the 048's are only lasting one race meeting on the front. The 032's will do 3 or 4 race meetings.

I have been pushing this with Yokohama for quite some time now and not really getting anywhere. It is good to have another opinion (not fornt wheel drive) to verify against.

:rolleyes: cheers :)

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us. We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :)

Luckily there is an open tender so hopefully we will find a better tyre :(

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us.  We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :D

Luckily there is an open tender so hopefully we will find a better tyre :P

Don't expect the supplier to change as Yokohama are the only ones with a big enough range of sizes to cover all the vehicles. What we need top push for is compound suitability, some sizes are only available in Super Soft which is really a wet weather compound. Some sizxes are only availalbe in Hard, which puts them at a dissadvantage. Start lobbying your delegate now.

:D cheers :D

I have been using Dunlop DZ02G's on my rex and they wear very well on the track and are very consistent. That said you pay $400 a corner for 215/45/17's!! ;)

I'll be putting RE55 265/35/18's on the GT-R for the track, hopefully they will be as consistent.

Regards

Andrew

troy, you have been at work too long. hit shut down and go home mate!! they are taking the mickey... 7:30pm at work is not good.

GTR on street tyres?? what were you thinking :O

RE55s are no good on GTRs at the track, what you really want is a street tyre and really let that ATTESAA thingie work for you...trust me :O

That's the same thing my monkey said when I asked him!! ;)

Andrew

GTR on street tyres?? what were you thinking :O

What am i thinking... i cant cheat as well as these GTR fellas. Twin turbos, 4WD, fancy rubber, aftermarket computers with electric toothbrushes ... its my duty as the Minster of Propoganda for lowly GTST owners to try and confuse the enemy

That's the same thing my monkey said when I asked him!!  ;)

LOL..sheesh, its never good when even on the inernet ppl see me for what i really am :)

What TommO said.

I'd recommend something like a set of Falken Azenis ST115s for a complete n00b. They're not bad as far as streeters go, but there's bugger all grip in them once you press on.

If you want to learn how to drive as quickly as possible (i.e. at the car's limits) you should probably set yourself low limits at first, to see what its like.

The car's easier to bring back since the tyres are more progressive at the limit (and there's less momentum because you're not going as fast), so its good to learn on before trying to get the kind of racing slicks F1 drivers wish they were still allowed to run in qualifying. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...