Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Absolutely....just add $200 to the prices :mellow:

Gordon Leven in Emu Plains for the Bridgestone and Yoko Tyres

Gary's motorsport tyres in Eastern Creek for Dunlops

give them a call for exact sizes available.

i got the RA1's and i rate them 1billion% awesome tyre but after around roughly 3-4 laps they feel very unsettled. Only time i get wheelspin is a hard 2nd gear shift...then again my car is fairly stock standard..running 235/45-17's all around so i can rotate them..wear is pretty brutal but they've lasted me a good 4 months now haaaard driving at supersprints and still have plenty in them...

Drunken,

I originally tried the A048's and I found them to be a pretty average tyre. Basically after the first couple of heat cycles they got quite oily almost and the rubber stiffened right up which made them very hard to get heat into them.

The only advantage was it meant the tyres lastest longer but they were a good couple of sec's slower around the track than RE55's.

I know a number of the WRX Club guys are using the Toyo's however. But I still think RE55's are the way to go for the ultimate street tyre. Robo - you need to come to the track again dude!

Have to agree on the 048's, the deterioration in their performance is quite noticeable after a few heat cylces. Most of the guys who run in catagories with choices between 032R's and 048R's are sticking to the 032R's. They are far more consistent in their lap times. Particlualry on the front wheel drive cars, the 048's are only lasting one race meeting on the front. The 032's will do 3 or 4 race meetings.

I have been pushing this with Yokohama for quite some time now and not really getting anywhere. It is good to have another opinion (not fornt wheel drive) to verify against.

:rolleyes: cheers :)

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us. We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :)

Luckily there is an open tender so hopefully we will find a better tyre :(

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us.  We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :D

Luckily there is an open tender so hopefully we will find a better tyre :P

Don't expect the supplier to change as Yokohama are the only ones with a big enough range of sizes to cover all the vehicles. What we need top push for is compound suitability, some sizes are only available in Super Soft which is really a wet weather compound. Some sizxes are only availalbe in Hard, which puts them at a dissadvantage. Start lobbying your delegate now.

:D cheers :D

I have been using Dunlop DZ02G's on my rex and they wear very well on the track and are very consistent. That said you pay $400 a corner for 215/45/17's!! ;)

I'll be putting RE55 265/35/18's on the GT-R for the track, hopefully they will be as consistent.

Regards

Andrew

troy, you have been at work too long. hit shut down and go home mate!! they are taking the mickey... 7:30pm at work is not good.

GTR on street tyres?? what were you thinking :O

RE55s are no good on GTRs at the track, what you really want is a street tyre and really let that ATTESAA thingie work for you...trust me :O

That's the same thing my monkey said when I asked him!! ;)

Andrew

GTR on street tyres?? what were you thinking :O

What am i thinking... i cant cheat as well as these GTR fellas. Twin turbos, 4WD, fancy rubber, aftermarket computers with electric toothbrushes ... its my duty as the Minster of Propoganda for lowly GTST owners to try and confuse the enemy

That's the same thing my monkey said when I asked him!!  ;)

LOL..sheesh, its never good when even on the inernet ppl see me for what i really am :)

What TommO said.

I'd recommend something like a set of Falken Azenis ST115s for a complete n00b. They're not bad as far as streeters go, but there's bugger all grip in them once you press on.

If you want to learn how to drive as quickly as possible (i.e. at the car's limits) you should probably set yourself low limits at first, to see what its like.

The car's easier to bring back since the tyres are more progressive at the limit (and there's less momentum because you're not going as fast), so its good to learn on before trying to get the kind of racing slicks F1 drivers wish they were still allowed to run in qualifying. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
    • Drove to Cape Schanck to try to get a nice clear southern view over the ocean to see the lights a couple of days ago... instead got crappy cloud cover. Photo of a diorama of Hong Kong street scene. Taken on an iPhone 13 Pro Max.
    • Stock RB fuel pressure is near enough 43.5 psi, so the latency in that table at 31.6 will be close. You can see that 7 or 8 psi equates to about 0.4µs extra latency. So if you wanted to interpolate between the 31.6 and 39.9 psi values you could say you're going up about 2 psi out of those 8, so add about 0.1µs, which is barely worth talking about and is quite possibly wrong because ideally you would fix the latency while running at the appropriate conditions on the dyno, with a wideband sniffing its butt.
    • The pressure, is what you set the fuel pressure to. If you have the factory fuel reg, you'll need to find the factory spec. I don't know it off the top of my head, but someone else might.
    • For others, what GTSBoy states here should be paid attention. Why? Well lots of people play with different engines, and they LOVE to change things like remove AC, or steering pumps etc, and it lends to them needing to move the tensioner too. You want your tensioner, particularly those that are sprung or hydraulically tensioned, to be the first thing after the harmonic balancer, or technically the "last" pulley in the chain. By saying last pulley, I mean look at the direction the crank spins when the engine is running, follow the belt from where the crank is pulling the belt FROM, and keep following that until you're between the last pulley/accessory on the belt and about to reach the crank again, this is the spot where you put the tensioner. This is the area that will always end up with slack. This is worked out exactly the same way for chains too, as the physics is the same for them. The crank pulley is where all the force to drag the belt around comes from. You will never ever get rid of the slack that appears, especially under load. The tensioners job is to keep the belt loose enough when stationary that there shouldn't be out of sync movement in slow movement, and then be tight enough when running, that the belt can't jump off any gear and get damaged. Too tight, bad things happen, too loose, bad things happen. Have a tensioner (mainly sprung/hydraulic one) in the wrong spot, it can't actually do anything about keeping the tension.
×
×
  • Create New...