Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Absolutely....just add $200 to the prices :mellow:

Gordon Leven in Emu Plains for the Bridgestone and Yoko Tyres

Gary's motorsport tyres in Eastern Creek for Dunlops

give them a call for exact sizes available.

i got the RA1's and i rate them 1billion% awesome tyre but after around roughly 3-4 laps they feel very unsettled. Only time i get wheelspin is a hard 2nd gear shift...then again my car is fairly stock standard..running 235/45-17's all around so i can rotate them..wear is pretty brutal but they've lasted me a good 4 months now haaaard driving at supersprints and still have plenty in them...

Drunken,

I originally tried the A048's and I found them to be a pretty average tyre. Basically after the first couple of heat cycles they got quite oily almost and the rubber stiffened right up which made them very hard to get heat into them.

The only advantage was it meant the tyres lastest longer but they were a good couple of sec's slower around the track than RE55's.

I know a number of the WRX Club guys are using the Toyo's however. But I still think RE55's are the way to go for the ultimate street tyre. Robo - you need to come to the track again dude!

Have to agree on the 048's, the deterioration in their performance is quite noticeable after a few heat cylces. Most of the guys who run in catagories with choices between 032R's and 048R's are sticking to the 032R's. They are far more consistent in their lap times. Particlualry on the front wheel drive cars, the 048's are only lasting one race meeting on the front. The 032's will do 3 or 4 race meetings.

I have been pushing this with Yokohama for quite some time now and not really getting anywhere. It is good to have another opinion (not fornt wheel drive) to verify against.

:rolleyes: cheers :)

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us. We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :)

Luckily there is an open tender so hopefully we will find a better tyre :(

Well that sucks, unless the tyre contract changes Yoko A048R are the tyre of the future for us.  We don't want to / can't afford new tyres every round so this will really hurt the lower budget teams :D

Luckily there is an open tender so hopefully we will find a better tyre :P

Don't expect the supplier to change as Yokohama are the only ones with a big enough range of sizes to cover all the vehicles. What we need top push for is compound suitability, some sizes are only available in Super Soft which is really a wet weather compound. Some sizxes are only availalbe in Hard, which puts them at a dissadvantage. Start lobbying your delegate now.

:D cheers :D

I have been using Dunlop DZ02G's on my rex and they wear very well on the track and are very consistent. That said you pay $400 a corner for 215/45/17's!! ;)

I'll be putting RE55 265/35/18's on the GT-R for the track, hopefully they will be as consistent.

Regards

Andrew

troy, you have been at work too long. hit shut down and go home mate!! they are taking the mickey... 7:30pm at work is not good.

GTR on street tyres?? what were you thinking :O

RE55s are no good on GTRs at the track, what you really want is a street tyre and really let that ATTESAA thingie work for you...trust me :O

That's the same thing my monkey said when I asked him!! ;)

Andrew

GTR on street tyres?? what were you thinking :O

What am i thinking... i cant cheat as well as these GTR fellas. Twin turbos, 4WD, fancy rubber, aftermarket computers with electric toothbrushes ... its my duty as the Minster of Propoganda for lowly GTST owners to try and confuse the enemy

That's the same thing my monkey said when I asked him!!  ;)

LOL..sheesh, its never good when even on the inernet ppl see me for what i really am :)

What TommO said.

I'd recommend something like a set of Falken Azenis ST115s for a complete n00b. They're not bad as far as streeters go, but there's bugger all grip in them once you press on.

If you want to learn how to drive as quickly as possible (i.e. at the car's limits) you should probably set yourself low limits at first, to see what its like.

The car's easier to bring back since the tyres are more progressive at the limit (and there's less momentum because you're not going as fast), so its good to learn on before trying to get the kind of racing slicks F1 drivers wish they were still allowed to run in qualifying. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...