Jump to content
SAU Community

Recommended Posts

stretch is against my religion. But a 235 should see you right.

Otherwise camber is also a bad thing in a street driven daily unless you dont mind paying the $ that it costs in how much quicker you chew ur tyres out because of said camber.. but around 1 degree on the rear should see the rims n tyres fitting as well as minimal tyre wear from it.

Cheers man, Been a great help!

Hey guys.

I've got a R32 gtst coupe running factory 16 inch wheels 205/55/16. Looking at some 17x9 17p offset buddy clubs with 255/40/17 tyres.

What will i be looking at foul wise?

Cheers!

Edited by benji-nz

Hey guys, not very good with offsets and what not so was just wondering how a set of Work CR Kai 18x9.5 +20 all round would sit on an R33 GTST two door. Would it be better just to stick to my original plan of Work XD9's 18x10 +18 all around? Guards have been pumped and were previously accommodating 18x10 +12 no problem.

Edited by gtsttrk

Hey guys, not very good with offsets and what not so was just wondering how a set of Work CR Kai 18x9.5 +20 all round would sit on an R33 GTST two door. Would it be better just to stick to my original plan of Work XD9's 18x10 +18 all around? Guards have been pumped and were previously accommodating 18x10 +12 no problem.

Alex's old car yeah?

Definitely the XD9s, size difference isn't huge but they look much better than cr kais imo

Alex's old car yeah?

Definitely the XD9s, size difference isn't huge but they look much better than cr kais imo

Yeah mate Alex's old car, cheers that's exactly what I was thinking. Only reason I was considering the CR's was I could get them for a steal! Thanks for the input :D

hey all been searching for ages but can't find any for a R34 GTT, what i'm gonna be getting are some 18x9 but not sure on what offset, i was thinking about getting some so that the wheels sit a little bit outside the guards, if anyone can give me some advice it would be greatly appreciated!

hey all been searching for ages but can't find any for a R34 GTT, what i'm gonna be getting are some 18x9 but not sure on what offset, i was thinking about getting some so that the wheels sit a little bit outside the guards, if anyone can give me some advice it would be greatly appreciated!

You weren't looking hard enough haha. There are some on here, but far and few between.

Search for my post, I had 18x9.5+22 on the front and 18x10.5+30 rear. Front was 0 camber, rear was natural (around 1 deg neg) and car was slammed. Both poked by around 5-10mm: not too aggressive that cops want to pull you over, but still a very nice offset.

The equivalent to mine is 18x9+16 up front, and 18x9+11 rear. If you plan on slamming your car, run stretch or you won't be able to lower it enough. I had 225/40 fr, 245/40 rear, guards sat over the tyres nicely. Your front liner will more then likely need to be removed because epic scrapeage.

Have fun, remember to post up pics :)

Here's the wheels I've been building. Just got car from the painters so the N1 rocker panels are going on today. No roll front or rear and standard 1.5 degrees of camber front and rear. 265/35/18 on 18x10.5 et23 O-disk R-disk. I spent some time coming up with the specs for these wheels. It's down to mm of clearance but works great.

post-82804-0-06648500-1363050008_thumb.jpg

post-82804-0-89822300-1363050022_thumb.jpg

post-82804-0-94387600-1363050038_thumb.jpg

Edited by warp speed

Here's the wheels I've been building. Just got car from the painters so the N1 rocker panels are going on today. No roll front or rear and standard 1.5 degrees of camber front and rear. 265/35/18 on 18x10.5 et23 O-disk R-disk. I spent some time coming up with the specs for these wheels. It's down to mm of clearance but works great.

perfect fitment for 32. Looks good

Hey guys,

Considering a set of Lenso Project E's from http://www.skylinesaustralia.com/forums/topic/420823-new-project-e-concave-wheels/

How would the 18x9.5+22's fit on 33 gtst?? I'm willing to roll the guards when i drop it in the near future

Thanks

Hey guys,

Considering a set of Lenso Project E's from http://www.skylinesaustralia.com/forums/topic/420823-new-project-e-concave-wheels/

How would the 18x9.5+22's fit on 33 gtst?? I'm willing to roll the guards when i drop it in the near future

Thanks

If you are slapping those wheels on and lowering, roll guards is a must. If you have it stock height, I don't see any issues, maybe a slight scrub on the front guard. Front poke, rear tuck.

Here is my R33 Skyline GTS-t with 18" Enkei RPF1

Front 18X9.5 + 15. 235 tyre with -3 degrees of camber

Rear 18x10 + 38 (5mm spacer) 265 tyre with -2 degrees of camber.

I could just squeeze my fingernail under the rear guard

post-59293-0-92880900-1363654694_thumb.jpg

post-59293-0-06489100-1363654779_thumb.jpg

post-59293-0-64287900-1363654825_thumb.jpg

post-59293-0-10737700-1363654847_thumb.jpg

post-59293-0-94783400-1363654887_thumb.jpg

post-59293-0-60566500-1363655496_thumb.jpg

post-59293-0-95842000-1363655517_thumb.jpg

Here is my R33 Skyline GTS-t with 18" Enkei RPF1

Front 18X9.5 + 15. 235 tyre with -3 degrees of camber

Rear 18x10 + 38 (5mm spacer) 265 tyre with -2 degrees of camber.

I could just squeeze my fingernail under the rear guard

Looks clean mate! :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...