Wheel Sizes & Offsets For Skylines

[SoulScene]

stretch is against my religion. But a 235 should see you right.

Otherwise camber is also a bad thing in a street driven daily unless you dont mind paying the $ that it costs in how much quicker you chew ur tyres out because of said camber.. but around 1 degree on the rear should see the rims n tyres fitting as well as minimal tyre wear from it.

Cheers man, Been a great help!

[benji-nz]

Hey guys.

I've got a R32 gtst coupe running factory 16 inch wheels 205/55/16. Looking at some 17x9 17p offset buddy clubs with 255/40/17 tyres.

What will i be looking at foul wise?

Cheers!

Edited February 25, 2013 by benji-nz

[joeyjoejoejuniorshabadoo]

should be fine mate

[P1@Y]

how do you guys think 18x9 with plus 20 offset would sit on a r33 4door?

[joeyjoejoejuniorshabadoo]

inside the guards, but not by much.

it's a decent looking, conservative fit

i ran 17 x 9 +20 skidders on my 33 at one point

[gtsttrk]

Hey guys, not very good with offsets and what not so was just wondering how a set of Work CR Kai 18x9.5 +20 all round would sit on an R33 GTST two door. Would it be better just to stick to my original plan of Work XD9's 18x10 +18 all around? Guards have been pumped and were previously accommodating 18x10 +12 no problem.

Edited March 5, 2013 by gtsttrk

[HEKT1K]

Hey guys, not very good with offsets and what not so was just wondering how a set of Work CR Kai 18x9.5 +20 all round would sit on an R33 GTST two door. Would it be better just to stick to my original plan of Work XD9's 18x10 +18 all around? Guards have been pumped and were previously accommodating 18x10 +12 no problem.

Alex's old car yeah?

Definitely the XD9s, size difference isn't huge but they look much better than cr kais imo

[gtsttrk]

Alex's old car yeah?

Definitely the XD9s, size difference isn't huge but they look much better than cr kais imo

Yeah mate Alex's old car, cheers that's exactly what I was thinking. Only reason I was considering the CR's was I could get them for a steal! Thanks for the input

[joeyjoejoejuniorshabadoo]

STRONG AGREE WITH RIC

[RBwonga]

hey all been searching for ages but can't find any for a R34 GTT, what i'm gonna be getting are some 18x9 but not sure on what offset, i was thinking about getting some so that the wheels sit a little bit outside the guards, if anyone can give me some advice it would be greatly appreciated!

[sleptema]

hey all been searching for ages but can't find any for a R34 GTT, what i'm gonna be getting are some 18x9 but not sure on what offset, i was thinking about getting some so that the wheels sit a little bit outside the guards, if anyone can give me some advice it would be greatly appreciated!

You weren't looking hard enough haha. There are some on here, but far and few between.

Search for my post, I had 18x9.5+22 on the front and 18x10.5+30 rear. Front was 0 camber, rear was natural (around 1 deg neg) and car was slammed. Both poked by around 5-10mm: not too aggressive that cops want to pull you over, but still a very nice offset.

The equivalent to mine is 18x9+16 up front, and 18x9+11 rear. If you plan on slamming your car, run stretch or you won't be able to lower it enough. I had 225/40 fr, 245/40 rear, guards sat over the tyres nicely. Your front liner will more then likely need to be removed because epic scrapeage.

Have fun, remember to post up pics

[warp speed]

Here's the wheels I've been building. Just got car from the painters so the N1 rocker panels are going on today. No roll front or rear and standard 1.5 degrees of camber front and rear. 265/35/18 on 18x10.5 et23 O-disk R-disk. I spent some time coming up with the specs for these wheels. It's down to mm of clearance but works great.

Edited March 12, 2013 by warp speed

[Frosty]

Here's the wheels I've been building. Just got car from the painters so the N1 rocker panels are going on today. No roll front or rear and standard 1.5 degrees of camber front and rear. 265/35/18 on 18x10.5 et23 O-disk R-disk. I spent some time coming up with the specs for these wheels. It's down to mm of clearance but works great.

perfect fitment for 32. Looks good

[warp speed]

Finished for now.

[toddals]

Hey guys,

Considering a set of Lenso Project E's from http://www.skylinesaustralia.com/forums/topic/420823-new-project-e-concave-wheels/

How would the 18x9.5+22's fit on 33 gtst?? I'm willing to roll the guards when i drop it in the near future

Thanks

[sleptema]

Hey guys,

Considering a set of Lenso Project E's from http://www.skylinesaustralia.com/forums/topic/420823-new-project-e-concave-wheels/

How would the 18x9.5+22's fit on 33 gtst?? I'm willing to roll the guards when i drop it in the near future

Thanks

If you are slapping those wheels on and lowering, roll guards is a must. If you have it stock height, I don't see any issues, maybe a slight scrub on the front guard. Front poke, rear tuck.

[toddals]

If you are slapping those wheels on and lowering, roll guards is a must. If you have it stock height, I don't see any issues, maybe a slight scrub on the front guard. Front poke, rear tuck.

cheers

[R377]

Here is my R33 Skyline GTS-t with 18" Enkei RPF1

Front 18X9.5 + 15. 235 tyre with -3 degrees of camber

Rear 18x10 + 38 (5mm spacer) 265 tyre with -2 degrees of camber.

I could just squeeze my fingernail under the rear guard

[ScreamerNewbie]

love the choice of rim, the colour on white looks great also, great offsets, perfect fitment IMO

[ishyz34]

Here is my R33 Skyline GTS-t with 18" Enkei RPF1

Front 18X9.5 + 15. 235 tyre with -3 degrees of camber

Rear 18x10 + 38 (5mm spacer) 265 tyre with -2 degrees of camber.

I could just squeeze my fingernail under the rear guard

Looks clean mate!