Jump to content
SAU Community

Recommended Posts

Hey,

Im just interested to find peoples opinion of this matter. As much as most people dont like it the new car generation which has grown up on Fast and the furiose, neon lights and awhole bunch of another stuff which most people tend to call rich; are starting to buy cars or just general into imports more due to movies and other stuff.

I find that most of them dont understand the idea of "supporting mods" or have the idea that when modding a car its like "how much for 2bar of boost.

My Supporting Mods idea, is basicly you cant have Set amount of hp, with an ecu, fuel pump, injectors, afm etc etc.... then think that its basicly buy a big turbo, add some boost (most dont know wat an EBC is and just hink there is a magic way to increase boost)

or they think its as easy as asking how much for 400rwhp, how can i make my Set Car run 12's.

Am i right or wrong? I know im generalizing abit which isnt the best, but out of alot of people i talk to that are in the "new generation age gap" it seems to be the trend.

Im not a old dude thats been around for ages or had my skylines for years but i learn (and are still learning) that hp isnt an easy thing it takes lot of planing and there are alot of thinks that you dont think you need but you do

well, im just talking to much now;

what are peoples opinion on this matter

Cheers Michael

p.s this is not a piss-take at anyone so plz dont take this the wrong way

werd...

i have heard heaps of people at uni saying how they want 300rwkw in their CA18, or want to run (insert boost) psi, etc etc...

like its some easy task...

hell i even heard a dude saying he was going to buy the White's R34 GTR!!! then find him searching for barina's and corolla's 10 minutes later..

they think its some achievement to push 300rwkw (which it is) but have no absolute idea whats involved and that Nitrous will solve all their problems.

All in all, they're young or new to the car scene and it's part of learning. They'll learn that it's not all black and white as it seems but it's up to the knowledgeable people to explain.

Maybe I've been around as you have because I think the same thing too. A lot of young people I talk to (esp 17yo's hanging to get their P plates) tell me they're chasing X-hp and they're going to do intercooler, FMIC, boost controller and bbearing turbo to achieve that. Soon they realise it's an expensive exercise becuase ECU is needed, injectors, dyno time, problems getting power to the ground, etc...

A mate told me that he wanted a MAP sensor on his SR20 with a GT25 BB turbo. Ask him why and he can't give you an answer.

Honestly there is no magical formula to get 400hp or run 12 seconds down the 1/4. I continually have to explain that a dyno is just a tuning device and 400hp on one dyno is not 400hp on another. And to run 12 seconds the driver better be up to scratch too.

This is partially true, but with advancements in power and technology (see 'are 12's the new 13's', and the RB20 250+ club threasa), it is more and more feasible.

Because people can just copy what these people have done, with out the trial and error, and with out money spent on development.

What I see as the problem, is people who upgrade the engine, but leave little attention to suspension, reliability, tyres, brakes etc. - the supporting mods

But I do agree, TFNF and other associated publicity has got some people into the import scene who should not necesarily be there

Edited by Mulkers

I know what you mean mate thats why forums such as these can be such a good starting point for people thinking about modifing there car. The main thing I find with people who have little knowledge is boost they think because joe blows car runs more boost that billy bobs that it will be quicker. Also they think they can just bolt a bigger turbo on and make 250 -300rwkw and dont relize injectors, fuels pumps, ECU, ect ect need to be upgraded as well.

I knew very little before I came to SAU and im still far from an expert but though by through these forums and researching every mod before actally doing it I have ended up with a car that performs as I wanted it to without spending a fortune on parts that I dont need, or parts that are not really appicable for the stage the car is at.

Edited by Munna
i love hearing this..

I have a '96 ford falcon im going to buy a turbo off ebay and drift.

ahaha, how true is that. I dont think they know drift isnt a doing a burnout mid/exit of a concer. i may not be able to drift, thou i know it isnt easy and isnt just i put a turbo = i cna drift rofl

Some guy asked me how much boost I run. I said 16psi. He said "that's not much ey, wrx's run 14 stock". I couldn't be f**ed explaining that my turbo was probably close to twice the size.

Also another mate buying an n/a Supra and saying he's going to single turbo it later on with a T88 not realising that such a turbo will require a crapload of work on the engine to support it.

But I agree that it's all about learning. I've said plenty of stupid crap in the past about cars but you live and you learn. The best way of learning for me was using forums, then actually buying a car and having the mods done while I owned rather than buying a modded one.

I can now tell you exactly what needs to be done to get 250rwkw (or so) in an R33 Gts-t whereas beforehand I had no clue.

My advice is to share your knowledge with the less knowledgeable. Someone somewhere along the line probably told you what you know, so pass the info on when you can :(

LOL. There is not much anybody can do. Just remember, the next time you answer somebodys question in a thread, think to yourself, did I post the same question once upon a time?

I know I have answered and helped people on these forums from info I received from it in the past and yet there is still a lot I have to learn.

Having 17 year olds, and some 25 year olds for that matter asking "How much boost has it got" isnt going to stop shortly.

Another problem is a lot of the workshops cashing in on the craze and taking a lot of these guys money. I was at a particular workshop recently picking up a mates car and overheard the mechanic talking to a P plate 180sx owner.

The mechanic lifted a bonnet of a GTR ( highly modified) to point out a nice blue Gates timing belt showing the kid "see, this makes xxxkw" and then said leave the cover off because it looks heaps better. The guy had a grin from ear to ear and asked "whats the purple HKS wheels for" which the mech replied " they give you more power mate, I can do them too for xx$$$" The kid didnt want to know the price he just asked if it would run 13s now. He booked it in but god knows how much the poor buggers gonna pay for it. But he hasnt learnt a thing. He doesnt even know what the cam gears do or how they work and the mechanic wasnt interested in telling him. He just saw dollar signs when the kids eyes lit up at the GTR engine bay.

MMmmm ive just given up talking to the young and nieve, but there is a line that must be drawn between the people you speek of and those that are genuinely sp* interested in learning.

For those i will give all my effort to share the knowledge that i have gathered whilst getting different perspectives on that which i already know. Ive been playing with engines and what not since about 9 years of age, and am fairly well respected amoungst my peers for having the knowledge i do for 19yo.

Though i do have a thirst for knowledge and am always keen to learn about that which i love its getting harder and harder to find people that speek from actual experience and those that speek from hear-say. And on that note how many of the 1000's of new workshops that hazve opened up in the past 3-5years would you actually trust to build you an engine? or let alone service your car...

Yeah i'm with you....although i'm only 24. I think i've said my fair share of dumb shit on my way to learning what i know. Thats why i come here though to fill up the knowledge banks...well as much as i can, doubt i'll ever be another SK or someone like that.

Still i think its good that people here are quite willing to help with most of your problems and questions.

But i nearly punched a guy the other day who told me he used to have an r33 gtst as well which was dynoed at over 320rwkw (he couldn't remember exactly) without even touching the stock computer.

Dumbass

Edited by shif_tea

he he... like the guy that sold me my car who said 'if you leave the stock ecu in and just reset it, you will be quicker than modified skylines...'

er... WTF... and we had rocked up in my mates modified r33 so its not like we had no previous experience...

just for the record my mates r33 tore me a new one when we went to Calder a few weeks after I bought the car...

...and I reset the ecu and everything!? :cheers:

The funny thing is that if some of the older guys read this they will wet themselves at the comments.

Whilst I agree there are many people who make tall claims and boast about boost, the modification scene today requires really requires very little prior experience, just some cash.

The reason why there are so many modified cars today (both imports and local) is because everyone (well most people anyway) just spend the cash and follow a simple proven formulae (exhaust, intercooler, ecu, turbo – sound familiar).

The reason there weren’t so many modified cars 30 years ago was because you couldn’t just go to a shop and purchase parts in the same way. A lot of the customizing was done in back sheds by guys who made their own parts or fabricated modifications from different vehicles (we don’t see a lot of this today)

So before you cast too many aspersions on “

the new car generation who have grown up on Fast and the furious and neon lights, and who don’t understand the idea of "supporting mods" or have the idea that when modding a car its like "how much for 2bar of boost.”

Just remember that we too are a new car generation who don’t know how to modify a car, and who only bolt on aftermarket accessories. (no difference between adding a radio or a turbo is there? These older guys used to make their own headers, modify the turbo themselves, roll some new flared guards and then chop 4inches out of the roof))

I think the problem with a lot of people isnt so much the supporting mods bit, but the 'other' supporting mods bit. Such as big engine you need big brakes, suspension, diffs, gearboxes etc. They all seem to be after thoughts. Im going the other way, atm, all I need to do is the rear brakes and Im ready for whatever I want to throw at the car, everything else is up to the task. But other than money the reason Im not is I still need to learn how to drive the car properly, when I am 100% confident with how it is now, I'll start with a few small bolt ons etc, and slowly build my way up. If I then find something isnt copeing, that will get up graded before I go further.

Live and learn, we all start somewhere :P. There will always be people who are genuinely interested in cars just like there will always be people who like cars but don't care that much. Some might have a very different background and have more catching up to do (heck i'm trained in biology and maths, cars are a whole new world :blink:). At the end of the day you can choose to help people or not, sometimes all that someone has to go on, is his mates gemi and they simply don't know anything else that's fast. Supporting mods are the real challenges to building nice cars I think (and knowing which are the best choices) and that is the sort of information I come here for. Thus I find myself asking some stupid questions but at least each time I do I learn, and I make a point of helping people who ask similar questions (instead of posting search :|).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
×
×
  • Create New...